IoT laitteiden datan vapautuminen

kotte · 25 Syyskuu 2025

-Teme- sanoi:
Tässä myös tuo 12.9.2026 päivämäärä.
Sen jälkeen uusissa laitteissa pitää olla se paikallinen rajapinta josta datan saa ulos.
Se tuskin on velvoittavana että sen jälkeen ei saa asentaa muita laitteita? Eli luultavasti esim vesilaitos voi käyttää vanhoja mittareita varastosta ilman paikallista rajapintaa kunhan ne on ostettu ennen em.päibämäärää

Hiukan pelkään, että odotukset ovat tämän ketjun viesteissä turhan suuret. Esimerkiksi vesimittari ei kerää muuta tietoa kuin mittaturbiinin tai ultraäänidoppler-mittauksen keräämän virtaaman kumulatiiviset tiedot (toki jos voi olla maksimilukemia ja virhetilastoja tms.). Tyypillisissä mittareissahan lukema on jatkuvasti näkyvissä näytöllä ja muita tietoja vuorotellaan. Joka iikkahan voi asentaa IR-kameran tms. mittarin päälle lukemaan jatkuvasti näyttöä. Näin ollen laitteessa on jo luonnostaan eräänlainen rajapinta. Käsittääkseni tuo näyttö on myös riitatapauksissa yleensä ratkaiseva, jos etäluku antaa poikkeavat lukemat.

Joidenkin laitteiden keräämät laajat historiatiedot (vrt. autot) on toinen kysymys ja kaiketi direktiivin ensisijainen kohde (ts. tarkoitus on estää noiden muodostuminen rahastuksen kohteeksi tai muuttuminen muun kuin kuluttajan ansainnan lähteeksi, omaisuudeksi tai jopa lievänasteisen kiristyksen kohteeksi).

-Teme- · 25 Syyskuu 2025

Säädöksen yhtenä tarkoituksena on vapauttaa esimerkiksi huoltotoimintaa, jolla pienet firmat pystyy saamaan laitteesta tiedot jotka vaatii muuten valmistajakohtaiset lisenssit / loggerit

pahapaha · 25 Syyskuu 2025

Hmm... olen kyllä sitä mieltä datasäädös velvoittaa tuon reaalidatan saamiseen tavalla tai toisella per nyt. Sitä varten asiassa oli kahden vuoden siirtymäaika että asiaan pystyi valmistautumaan. Mulle on ihan sama miten asia toteutetaan mutta koska pitää olla tarjota dataa niin se että näen mittarista luvut - ei ole riittävä. Ei myöskään ole riittävää se että sähkömittarissa vilkkuu ledi johon voi kyllä rakentaa (niinkuin minulla on) vaikka ESP32 anturilla siihen logituksen joka menee HA:han. Mutta kun haluan että toimijat noudattavat säädöksiä.

Luukku · 29 Syyskuu 2025

BMW:ltä ilmoitus:
Kolmannen osapuolen tarjoajien suorittamaa latauksen etävalvontaa koskevat uudet turvallisuusstandarditOn olemassa kolmannen osapuolen tarjoajia, jotka käyttävät ajoneuvon latauksen ohjaamiseen ajoneuvon käyttöliittymää (asiakkaan antama käyttäjätunnus ja salasana). Henkilötietojesi turvallisuuden ja ajoneuvosi paremman suojauksen varmistamiseksi aletaan 29. syyskuuta alkaen rajoittaa mahdollisuutta antaa kolmansien osapuolten palveluntarjoajien käyttää suoraan tietojasi, ja ohjata ajoneuvosi latausta ajoneuvon käyttöliittymän kautta.Tämä toimenpide EI vaikuta seuraaviin toimintoihin:My BMW App / MINI App -sovelluksen lataus- ja tilatoiminnotKaikki kotilatausaseman nykyiset ohjaustoiminnot (kuten aurinko- tai kuormitusoptimoitu lataus)Tällä hetkellä tuetut yksityiset ja julkiset latausasematJatkossa latauksen etäohjaus kolmansien osapuolten kautta on mahdollista vain hyväksytyn ajoneuvon käyttöoikeusprosessin kautta. Hyväksyttyä prosessia käyttävien yhteensopivien palveluntarjoajien luetteloa laajennetaan jatkuvasti.Tällä hetkellä Suomessa ei ole yhteensopivia palveluntarjoajia.Yhteensopivat Home Energy Management System-palveluntarjoajat: GridX, E.ON Home, E3/DC, Gridio.Jos käytät jo yhteensopivaa palveluntarjoajaa, se ottaa sinuun yhteyttä.

Kotiautomaatioprojektien käyttäjät yhteisöissä eivät enää pääse ajoneuvoon käsiksi tavalliseen tapaan. Ajoneuvon tietoihin pääsee kuitenkin käsiksi uuden BMW- ja MINI CarData -käyttöliittymän kautta. Tietoa CarDatasta löytyy Connected Drive Portal / MINI Connected -portaalista.

xismo · 30 Syyskuu 2025

Mitenköhän Mersuissa pääsee kiinni ajoakun lataustilanteeseen ? Developer tunnuksen kautta pääsee kunhan on y-tunnus ja maksaa kuukausimaksun halutusta datapaketista. Mutta ei tuo oikein toimi yksittäiselle kotiautomaation kehittäjälle. Onko jollain tarkempaa tietoa ?

-Teme- · 30 Syyskuu 2025

Datasäädöksen perusteella ei pitäisi olla enää ongelmaa, vaan valmistajan tulee antaa pääsy kaikkeen heidän autosta keräämäänsä dataan rajapinnan kautta.
Itselle herännyt epäilys että tämä rajapinta on OBD portti, mutta siihen pitäisi saada jokin lukija mikä aktiivisesti raportoi tiedot omalle serverille

xismo · 1 Lokakuu 2025

Tiedän ettei pitäisi olla ongelma mutta törmäsin sellaiseen muuriin kun yriin sitä kysellä että meni halu selvitellä lisää. Kohtelu oli aika tylyä. Maksa ensin niin vastaamme mitä tarvitset ostaa lisää tyyliin.

-Teme- · 1 Lokakuu 2025

Erittäin mielenkiintoista luettavaa sähkömittarien toiminnasta ja mitä kaikkea dataa se lähettää.
AMR 2.0 mukaisten mittarien on lähetettävä vähintään 15min välein 5min tasetieto verkkoyhtiölle ja se sisältää kaiken mittarin keräämän raakadatan. Sen jälkeen verkkoyhtiö perkaa dataa ja filtteröi virheet pois, tai kerää puuttuvat datat uusiksi.
Antti Niemen Dipparityö

AMR 2.0 vaatimukset loppuraportti Täällä on lueteltu mm.

Mittalaitteen tulee mitata seuraavien suureiden hetkellisarvot: vaihekohtainen pätö- jaloisteho, jännite ja virta sekä sähköverkon paikallinen taajuus. Hetkellisarvot tulee ollasiirrettävissä ulkoisiin laitteisiin mittauslaitteen paikallisen tiedonsiirtorajapinnan kautta.Mikäli hetkellisarvoja käytetään asiakaslaskutuksen perusteena, esim. kuukauden huipputeho, tulee ne rekisteröidä mittalaitteen muistiin ja välittää asiakkaalle. Muiden kuin laskutuksessakäytettävien hetkellisarvojen rekisteröinnistä päättää verkonhaltija (esim. minimi- jamaksimiarvot tietyllä ajanjaksolla). Asiakas tai asiakkaan valtuuttama kolmas osapuoli voivathyödyntää mittalaitteen mittaamia hetkellisarvoja energiatehokkuustoimenpiteissä sekäsähkönkulutuksen ja tehonkäytön optimoinnissa.

Mittauslaitteen tulee rekisteröidä kaikki – myös alle kolmen minuutin pituiset –jännitteettömät ajat. Jännitteetöntä aikaa koskevat tiedot tulee välittää asiakkaalle.

Kaikki mittalaitteen rekisteröimät tiedot tulee voida lukea mittauslaitteiston muististaviestintäverkon kautta (etäluentaominaisuus).

Mittauslaitteessa tulee olla paikallinen fyysinen tiedonsiirtoväylä, joka perustuu yleisestikäytössä olevaan, laitetoimittajariippumattomaan avoimeen standardoituuntiedonsiirtorajapintaan. Tiedonsiirtoväylän tulee mahdollistaa reaaliaikaisen mittaustiedon,kuten hetkellisen teho- ja kulutustiedon välittäminen (push) väylään kytketyille laitteille.Rajapinnan kautta välitettävien tietojen päivitystiheys tulee olla vähintään kerran viidessä (5)sekunnissa

mm. taajuustietoa ei tule HAN portista

Nyt kun päästiin 15min mittausjaksoon, niin vaatimuksessa on vielä hieman kovempi taso

Mittausjakso tulee ollaohjelmallisesti muutettavissa etäyhteyden välityksellä yhdestä (1) tunnista viiteentoista (15)minuuttiin. Myös tätä lyhyempi viiden (5) minuutin ja kolmen (3) minuutin mittausjakso tuleeolla mahdollinen.

haraldh · 2 Lokakuu 2025

pahapaha sanoi:
Hmm... olen kyllä sitä mieltä datasäädös velvoittaa tuon reaalidatan saamiseen tavalla tai toisella per nyt. Sitä varten asiassa oli kahden vuoden siirtymäaika että asiaan pystyi valmistautumaan. Mulle on ihan sama miten asia toteutetaan mutta koska pitää olla tarjota dataa niin se että näen mittarista luvut - ei ole riittävä. Ei myöskään ole riittävää se että sähkömittarissa vilkkuu ledi johon voi kyllä rakentaa (niinkuin minulla on) vaikka ESP32 anturilla siihen logituksen joka menee HA:han. Mutta kun haluan että toimijat noudattavat säädöksiä.

Rupesin nyt saamaan hiljaisuutta vastauksena viesteihini kun kyselin keravan energialta miten aikovat täyttää datasäädöksen vaatimukset per nyt. PItää varmaan antaa heille takaraja, ja sitten lähestyä traficomia. Miten teillä muilla on mennyt keskustelu verkkoyhtiöiden kanssa?

-Teme- · 2 Lokakuu 2025

haraldh sanoi:
Rupesin nyt saamaan hiljaisuutta vastauksena viesteihini kun kyselin keravan energialta miten aikovat täyttää datasäädöksen vaatimukset per nyt. PItää varmaan antaa heille takaraja, ja sitten lähestyä traficomia. Miten teillä muilla on mennyt keskustelu verkkoyhtiöiden kanssa?

Samalla tavalla edennyt Carunan kanssa. Ensin tuli se kieltävä kuittaus aspasta.
Tarkempi pyyntö lähti tietosuoja@caruna.fi osoitteeseen mutta sieltä ei ole kuulunut mitään.
Vastaukselle annettu takarajaksi 12.10.2025 minkä jälkeen käännytään valvovan viranomaisen puoleen, eli Traficomin suuntaan.
Jos Traficom asettuu verkkoyhtiöiden kannalle, voi lähteä kyselemään tarkennusta EU suunnasta vielä - mutta silloin homma kestää, mutta ei ole eka kerta kun Traficom, verottaja yms ovat tulkinneet asioita EU tarkoituksen vastaisesti (autoverot, ELV jne...)

haraldh · 2 Lokakuu 2025

Laitanpa vastauksessani myös parin viikon aikarajan heille. PIdäthän meidät ajan tasalla miten sun homma etenee. Helpointa verkkoyhtiölle olisi varmaan vain vaihtaa se mittari nyt jo halukkaille. Halukkaita on varmaan vain murto-osa kaikista asiakkasta, eli lämpöpumppufoorumin jäsenet.

fraatti · 5 Lokakuu 2025

Itseasiassa.... Viessmanniin on tullut melkoinen määrä dataa saataville vanhojen lisäksi apin kautta.

Data Points

Here, you can find the list of features available in our IoT API. The features are divided in the following groups: Device, Electrical energy system (ESS), Floor heating (FHT), Gateway, Heating, Point of common coupling (PCC), Photovoltaic, Thermostatic radiator valve (TRV), Ventilation

You can find the feature name, a description and whether the feature is available in the Basic or the Advanced plan. Use the search field to quickly find what you are looking for. Note that the features that are available for your device varies based on your device type and the controller installed.

Device

DevPortalEuDataActRead
device.actorSensorTest
Shows the status of the actor and sensor test. Provides command to activate it.
DevPortalEuDataActRead
device.brand
Shows the member ID of the device in a cascade.
DevPortalEuDataActRead
device.commissioning.information
Shows commissioning information.
DevPortalEuDataActRead
device.commissioning.state
Shows the current state of the commissioning process.
DevPortalEuDataActRead
device.configuration.houseLocation
Shows object location.
DevPortalEuDataActRead
device.configuration.measurementWeight
Shows the sensor's relative importance weight during computation of the room's state. Provides a command to set it.
DevPortalEuDataActRead
device.demand.external
Shows the current demand status of the device by an external influence.
DevPortalEuDataActRead
device.etn
Shows the electronic traceability number of the system.
DevPortalEuDataActRead
device.heatingCircuitId
Shows the ID of the heating circuit to which the device is connected. Provides commands to assign and unassign them.
DevPortalEuDataActRead
device.hmi
Shows the installed HMI type with the device.
DevPortalEuDataActRead
device.identification
Shows the request for the device identification status.
DevPortalEuDataActRead
device.information
Shows the device manufacturer and model.
DevPortalEuDataActRead
device.lock.external
Shows the current lock status of the device by an external influence.
DevPortalEuDataActRead
device.lock.malfunction
Shows the current lock status of the device by a malfunction.
DevPortalEuDataActRead
device.maintenance
Shows the 'Maintenance' mode state for the device. Provides a command to reset it.
DevPortalEuDataActRead
device.messages.errors.counter.d6
Shows the number of D6 errors.
DevPortalEuDataActRead
device.messages.info.raw
Shows the active info messages of the controller.
DevPortalEuDataActRead
device.messages.logbook
Shows the at max five most recent logbook entries of the controller.
DevPortalEuDataActRead
device.messages.service.raw
Shows the active service messages of the controller.
DevPortalEuDataActRead
device.messages.status.raw
Shows the active status messages of the controller.
SRC
device.name
Shows the device name set by user.
DevPortalEuDataActRead
device.offPeakSignal
Shows the device off-peak signal state.
DevPortalEuDataActRead
device.offPeakSignal.active
Shows whether offPeak is active or not.
DevPortalEuDataActRead
device.offPeakSignal.configuration
Shows whether a offPeak is used or not and provides command to de-/activate it.
DevPortalEuDataActRead
device.parameterIdentification.version
Shows information about parameter identification version.
SRC, DevPortalEuDataActRead
device.power.battery
Shows battery information.
DevPortalEuDataActRead
device.power.consumption.limitation
Shows the configuration of consumption limitation.
DevPortalEuDataActRead
device.power.statusReport.consumption
Shows the values of consumption limitation.
DevPortalEuDataActRead
device.power.statusReport.production
Shows the values of production limitation.
DevPortalHeatingRead, Heating, DevPortalEuDataActRead
device.productIdentification
Shows the device identification data.
DevPortalHeatingRead, Heating
device.productMatrix
Shows product matrix details.
DevPortalEuDataActRead
device.pvSignal
Shows if photovoltaic energy is available or not.
DevPortalEuDataActRead
device.pvSignal.active
Shows whether photovoltaic is active or not.
DevPortalEuDataActRead
device.remoteReset
Provides command to remote reset the device including requirement.
SRC
device.sensors.humidity
Shows the humidity room sensor value.
SRC
device.sensors.temperature
Shows the temperature room sensor value.
DevPortalHeatingRead, Heating
device.serial
Shows the serial number of connected device.
DevPortalEuDataActRead
device.serial.internalComponents
Shows the list of built-in components in the device.
DevPortalEuDataActRead
device.setDefaultValues
device.setDefaultValues
DevPortalEuDataActRead
device.status
Presents if the device is OK.
DevPortalEuDataActRead
device.thirdparty.manufacturer
Shows the third-party device manufacturer's name.
DevPortalEuDataActRead
device.thirdparty.model
Shows the model-name of a third party device.
DevPortalEuDataActRead
device.thirdparty.name
Shows the name of a third party device.
DevPortalEuDataActRead
device.thirdparty.version.software
Shows the software version of a third party device.
DevPortalHeatingRead, Heating
device.time.daylightSaving
Shows the daylight saving time state and its validity period. Provides commands to configure it.
DevPortalEuDataActRead
device.timeseries.burner.stops
Shows the frequency and reason for the device burner's stops.
DevPortalEuDataActRead
device.timeseries.dhw.burner.stops
Shows the frequency and reason for the device DHW burner's stops.
DevPortalEuDataActRead
device.timeseries.ignitionTimeSteps
Shows the ignition frequency separated into statistical classes for the device.
DevPortalEuDataActRead
device.timeseries.monitoringIonization
Shows the ionization frequency separated into statistical classes for the device.
DevPortalEuDataActRead
device.timeseries.water.pressure.peaks
Shows the water pressure peak frequency separated into statistical classes for the device.
DevPortalEuDataActRead
device.timezone
Shows the timezone which is set on the device. Provides a command to set it.
DevPortalEuDataActRead
device.type
Presents information if heat pump is split or mono device.
DevPortalHeatingRead, Heating, DevPortalEuDataActRead
device.variant
Presents further information about the device-variant.
DevPortalEuDataActRead
device.zigbee.active
Shows whether a zigbee is active or not.
DevPortalEuDataActRead
device.zigbee.lqi
Shows the link quality indicator of the zigbee signal.
DevPortalEuDataActRead
device.zigbee.parent.id
Shows the euid number of the parent device.
DevPortalEuDataActRead
device.zigbee.parent.rx
Shows the received link quality indicator from device to his parent.
DevPortalEuDataActRead
device.zigbee.parent.tx
Shows the transport link quality indicator from device to his parent.
DevPortalEuDataActRead
device.zigbee.status
Shows the status of the zigbee.

Electrical energy system (ESS)

DevPortalEuDataActRead
ess.battery.usedAverage
Shows the usable energy average of the six modules and the whole System.
DevPortalEuDataActRead
ess.configuration.backupBox
Shows the value for the reserved power which is used if the grid delivering is interrupted.
DevPortalEuDataActRead
ess.configuration.systemType
Shows the types of the electrical energy system.
DevPortalEuDataActRead
ess.energy.consolidated
Shows the charged energy of battery in cascade.
DevPortalEuDataActRead
ess.features.backupReservedCapacity
Shows whether the BackupReservedCapacity currently activated. Provides command to de-/activate it.
DevPortalEuDataActRead
ess.features.batterySleepMode
Shows whether the BatterySleepMode is currently activated. Provides command to de-/activate it.
DevPortalEuDataActRead
ess.features.cyclicLoadCompressor
Shows whether the CyclicLoadCompressor is currently activated. Provides command to de-/activate it.
DevPortalEuDataActRead
ess.features.optimalSelfConsumption
Shows whether the OptimalSelfConsumptionis currently activated. Provides command to de-/activate it.
DevPortalEuDataActRead
ess.inverter.ac.power
Shows the current power of the inverter in watt.
Battery, DevPortalEuDataActRead
ess.operationState
Shows the status of the electrical energy operation state.
Battery, DevPortalEuDataActRead
ess.power
Shows power of battery.
DevPortalEuDataActRead
ess.power.feedInLimitation.consolidated
Shows power feed in limitation in cascade.
DevPortalEuDataActRead
ess.power.maximum.charge.consolidated
Shows power maximum charge in cascade.
DevPortalEuDataActRead
ess.power.maximum.discharge.consolidated
Shows power maximum discharge in cascade.
DevPortalEuDataActRead
ess.power.nominal.charged.consolidated
Shows batteries charged nominal power in cascade.
DevPortalEuDataActRead
ess.power.nominal.discharged.consolidated
Shows batteries discharged nominal power in cascade.
DevPortalEuDataActRead
ess.power.nominal.inverter
Shows the three-phase inverter maximum nominal power.
DevPortalEuDataActRead
ess.power.nominal.inverter.consolidated
Shows batteries discharged nominal power in cascade.
DevPortalEuDataActRead
ess.sensors.temperature.ambient
Shows the temperature and the status of the ambient temperature sensor.
Battery
ess.stateOfCharge
Shows the state of charge in percent.
DevPortalEuDataActRead
ess.transfer.charge.cumulated
Shows the statistic values of charging the battery in different periods in wattHour.
Battery, DevPortalEuDataActRead
ess.transfer.discharge.cumulated
Shows the throughput of electrical energy of the battery this day.
DevPortalEuDataActRead
ess.version.hardware
Shows information about hardware version.

ems

DevPortalEuDataActRead
ems.control.vcs.N.status
Shows the VCS control algorithm's current status.
DevPortalEuDataActRead
ems.heatingRod.connectionPoint
Shows the heating rod connection type in the HEMS.
DevPortalEuDataActRead
ems.hoca.features.allowBatteryChargingFromTheGrid
Shows whether the AllowBatteryChargingFromTheGridis currently activated.
DevPortalEuDataActRead
ems.hoca.features.photovoltaicExcessToPvHeater
Shows the photovoltaic excess to PV heater mode state. Provides command to de/activate it.
DevPortalEuDataActRead
ems.hoca.features.tariffBasedFinancialOptimization
Shows whether the TariffBasedFinancialOptimization is currently activated.
DevPortalEuDataActRead
ems.hoca.features.vcsOverloadProtection
Shows wether the OverloadProtection for the Vehicle Charging Station is currently activated.
DevPortalEuDataActRead
ems.hoca.features.vehicleChargingStationAllowBatteryDischarge
Shows the state of the vehicle charging station battery usage configuration. Provides commands to it.
DevPortalEuDataActRead
ems.kpi
Shows Key Performance Indicators measured by HEMS.
DevPortalEuDataActRead
ems.tariffs.feedIn
Shows the price of energy production in a given time period
DevPortalEuDataActRead
ems.tariffs.heating
Shows the price of energy consumption in a given time period
DevPortalEuDataActRead
ems.tariffs.household
Shows the price of energy consumption in a given time period

Floor heating (FHT)

DevPortalEuDataActRead
fht.configuration.floorCoolingCondensationShutdownMargin
Shows the emergency margin for the condensation threshold.
DevPortalEuDataActRead
fht.configuration.floorCoolingCondensationThreshold
Shows the minimal temperature of the floor to prevent dew condensation.
DevPortalEuDataActRead
fht.configuration.floorHeatingDamageProtectionThreshold
Shows the maximal temperature of the floor to prevent its damage. Provides a command to set it.
SRC, DevPortalEuDataActRead
fht.operating.modes.active
Shows the currently active mode of the floor heating.
SRC
fht.operating.modes.cooling
Shows the cooling mode state of the floor heating.
SRC
fht.operating.modes.heating
Shows the heating mode state of the floor heating.
SRC
fht.operating.modes.standby
Shows the stand by mode state of the floor heating.
SRC
fht.sensors.temperature.supply
Shows information related with temperature sensor located on the flow pipe of the FHT.
DevPortalEuDataActRead
fht.valve
Shows FHT valve type. Provides a command to set it.
DevPortalEuDataActRead
fht.valve.state
Shows the valve state (close/open).

Fuel cell

DevPortalEuDataActRead
fuelCell.burner.process
Shows burner process values like activation, air volume flow, fan speed and fan power.
DevPortalEuDataActRead
fuelCell.coolingWater
Shows details of the cooling water of the fuel cell.
DevPortalEuDataActRead
fuelCell.electricalEnergyConsumption.value
Shows the consumption of electrical energy.
DevPortalEuDataActRead
fuelCell.errors.raw
Shows the list of raw errors returned by the fuel cell.
DevPortalEuDataActRead
fuelCell.gas.details
Shows details about the first gas volume flow, second gas volume flow, gas hydrogen concentration and the booster pump power.
DevPortalEuDataActRead
fuelCell.gas.exhaust
Shows information of the exhaust gas.
DevPortalEuDataActRead
fuelCell.information.software.thirdParty
Shows the software versions of the different boards of the fuel cell.
DevPortalEuDataActRead
fuelCell.managers.energy
Shows whether the electrical energy history should be reset or not.
DevPortalEuDataActRead
fuelCell.managers.energy.prediction.power.consumption
Contains the predicted consumption of electrical energy in watt hour.
DevPortalEuDataActRead
fuelCell.managers.energy.prediction.runtime
Shows the predicted runtime of the fuel cell unit.
DevPortalEuDataActRead
fuelCell.managers.energy.timeTillNextStart
The feature shows time till next start in hours
Fuel cell
fuelCell.operating.modes.active
Shows current active operating mode on the device and provides command to change it.
Fuel cell
fuelCell.operating.modes.chimneySweeperMode
Shows whether the holidayWithFuelCellOn operating mode is active now.
Fuel cell
fuelCell.operating.modes.ecological
Shows whether the ecological operating mode is active now.
Fuel cell
fuelCell.operating.modes.economical
Shows whether the economical operating mode is active now.
Fuel cell
fuelCell.operating.modes.energyControlled
Shows whether the energyControlled operating mode is active now.
Fuel cell
fuelCell.operating.modes.heatControlled
Shows whether the heatControlled operating mode is active now.
Fuel cell
fuelCell.operating.modes.holidayWithFuelCellOff
Shows whether the holidayWithFuelCellOn operating mode is active now.
Fuel cell
fuelCell.operating.modes.holidayWithFuelCellOn
Shows whether the holidayWithFuelCellOn operating mode is active now.
Fuel cell
fuelCell.operating.modes.maintenance
Shows whether the maintenance operating mode is active now.
Fuel cell
fuelCell.operating.modes.party
Shows whether the holidayWithFuelCellOn operating mode is active now.
Fuel cell
fuelCell.operating.modes.standby
Shows whether the Standby operating mode is active now.
Fuel cell, DevPortalEuDataActRead
fuelCell.operating.phase
Shows information about current phase which the fuel cell is in.
DevPortalEuDataActRead
fuelCell.oxidation.preferential
Shows information about the preferential oxidation.
Fuel cell
fuelCell.power.production
Shows the amount of energy produced by the fuel-cell in kwH
DevPortalEuDataActRead
fuelCell.power.production.lastTwoYears
Shows the generated electrical energy over the last two years.
DevPortalEuDataActRead
fuelCell.prediction.heating.deficit
Shows information about the total heating deficit.
Fuel cell, DevPortalEuDataActRead
fuelCell.sensors.temperature.return
Shows information about flow return temperature sensor, i.e. water temperature on return to the boiler from heating installation.
Fuel cell, DevPortalEuDataActRead
fuelCell.sensors.temperature.supply
Shows information about flow temperature sensor, i.e. water temperature on return to the boiler from heating installation.
DevPortalEuDataActRead
fuelCell.sequence
Shows the sequence numbers of the fuel cell.
Fuel cell, DevPortalEuDataActRead
fuelCell.statistics
Shows statistics of fuel Cell.
DevPortalEuDataActRead
fuelCell.temperature.processor
Shows different temperatures of fuel cell processor.

fuelcell

DevPortalEuDataActRead
fuelcell.status.extended
Shows the fuel cell extended status information.

Gateway

DevPortalEuDataActRead
gateway.bmuconnection
The status, of the connection between the Boiler Management Unit and the Boiler.
DevPortalHeatingRead, Heating
gateway.devices
List the devices connected to the gateway.
DevPortalHeatingRead, Heating, DevPortalEuDataActRead
gateway.wifi
Shows information related to the WiFi in a gateway.

hb2

DevPortalEuDataActRead
hb2.veryLongComfortMode
Shows whether the veryLongComfortMode is active on Heatbox2 or not.

Heating

Heating+, DevPortalEuDataActRead
heating.boiler.airflaps.N.position.current
Shows the current position of the air-flaps.
Heating+, DevPortalEuDataActRead
heating.boiler.ash.level.current
Shows the current fill-level of the ash-container.
DevPortalHeatingRead, Heating, DevPortalEuDataActRead
heating.boiler.operating.phase
Shows the connected solid fuel boiler state.
Heating+, DevPortalEuDataActRead
heating.boiler.pumps.circuit
Shows the boiler-circuit-pump current state.
DevPortalEuDataActRead
heating.boiler.pumps.circuit.power.current
Shows the boiler-circuit pump current power.
DevPortalEuDataActRead
heating.boiler.pumps.internal
Shows if circulation pump is on for circuit
DevPortalEuDataActRead
heating.boiler.pumps.internal.current
Shows the current value in percent for the internal pump.
DevPortalEuDataActRead
heating.boiler.pumps.internal.target
Shows the target-value in percent for the internal pump.
DevPortalEuDataActRead
heating.boiler.sensors.temperature.commonReturn
Shows the common return temperature with a unit and its sensor status.
DevPortalHeatingRead, Heating
heating.boiler.sensors.temperature.commonSupply
Shows information related with temperature sensor located on the exit of heating installation of boiler.
DevPortalHeatingRead, Heating
heating.boiler.sensors.temperature.main
Shows information related with main temperature sensor.
DevPortalHeatingRead, Heating
heating.boiler.serial
(Deprecated for E3 devices will be replaced by device.serial) Shows the serial number of connected boiler.
DevPortalHeatingRead, Heating, DevPortalEuDataActRead
heating.boiler.temperature
Shows the value of boiler temperature.
DevPortalEuDataActRead
heating.boiler.temperature.current
Contains information about set temperature of the primary heating circuit.
DevPortalHeatingRead, Heating, DevPortalEuDataActRead
heating.buffer.charging.level.bottom
Shows the buffer cylinder charging state at the bottom.
DevPortalHeatingRead, Heating, DevPortalEuDataActRead
heating.buffer.charging.level.middle
Shows the buffer cylinder charging state in the middle.
DevPortalHeatingRead, Heating, DevPortalEuDataActRead
heating.buffer.charging.level.top
Shows the buffer cylinder charging state at the top.
DevPortalHeatingRead, Heating, DevPortalEuDataActRead
heating.buffer.charging.level.total
Shows the buffer cylinder charging state in total.
DevPortalEuDataActRead
heating.buffer.hysteresis
Shows information about the heat medium buffer temperature.
DevPortalHeatingRead, Heating, DevPortalEuDataActRead
heating.buffer.sensors.temperature.main
Shows information about current value and status of the buffer temperature sensor.
DevPortalEuDataActRead
heating.buffer.sensors.temperature.midTop
Shows the status and the value of the middle-top temperature sensor in the heating water buffer.
DevPortalHeatingRead, Heating
heating.buffer.sensors.temperature.top
Shows the buffer cylinder top temperature sensor details.
DevPortalHeatingRead, Heating, DevPortalEuDataActRead
heating.bufferCylinder.charging.level.bottom
Shows the buffer cylinder charging bottom level.
DevPortalHeatingRead, Heating, DevPortalEuDataActRead
heating.bufferCylinder.charging.level.middle
Shows the buffer cylinder charging middle level.
DevPortalHeatingRead, Heating, DevPortalEuDataActRead
heating.bufferCylinder.charging.level.top
Shows the buffer cylinder charging top level.
DevPortalHeatingRead, Heating, DevPortalEuDataActRead
heating.bufferCylinder.charging.level.total
Shows the buffer cylinder charging level in total.
DevPortalEuDataActRead
heating.bufferCylinder.hysteresis
Shows information about the heat medium buffer temperature in kelvin
DevPortalHeatingRead, Heating
heating.bufferCylinder.sensors.temperature.bottom
Shows the buffer cylinder bottom temperature sensor details.
DevPortalHeatingRead, Heating, DevPortalEuDataActRead
heating.bufferCylinder.sensors.temperature.main
Shows information about current value and status of the buffer temperature sensor.
DevPortalHeatingRead, Heating
heating.bufferCylinder.sensors.temperature.midBottom
Shows the buffer cylinder middle-bottom temperature sensor details.
DevPortalHeatingRead, Heating
heating.bufferCylinder.sensors.temperature.middle
Shows the buffer cylinder middle temperature sensor details.
DevPortalHeatingRead, Heating, DevPortalEuDataActRead
heating.bufferCylinder.sensors.temperature.midTop
Shows the buffer cylinder middle-top temperature sensor details.
DevPortalHeatingRead, Heating
heating.bufferCylinder.sensors.temperature.top
Shows the buffer cylinder top temperature sensor details.
DevPortalHeatingRead, Heating
heating.burners
Provides the device enabled burners list.
DevPortalEuDataActRead
heating.burners.modulation.total
Shows the total modulation of the burner cascade.
DevPortalEuDataActRead
heating.burners.N.automatic
DEPRECATED in favor of heating.burners.0.errorStatus
DevPortalEuDataActRead
heating.burners.N.demand.modulation
Shows information related with target burner modulation.
DevPortalEuDataActRead
heating.burners.N.demand.temperature
Shows information related with target burner temperature.
DevPortalEuDataActRead
heating.burners.N.errorStatus
heating.burners.0.errorStatus
DevPortalEuDataActRead
heating.burners.N.manualActivation
Shows whether the burner got activated manually and provides the commands to do so.
DevPortalHeatingRead, Heating, DevPortalEuDataActRead
heating.burners.N.modulation
Shows information related with current burner modulation.
DevPortalEuDataActRead
heating.burners.N.preConditions
Shows the burner start preconditions.
DevPortalEuDataActRead
heating.burners.N.sensors.o2
Shows the current value, unit and the status of the oxygen probe.
DevPortalHeatingRead, Heating, DevPortalEuDataActRead
heating.burners.N.statistics
Shows statistics of burner.
DevPortalEuDataActRead
heating.calculated.temperature.outside
Shows the calculated outside temperature using the sensor readings and the damping factor into account.
DevPortalEuDataActRead
heating.callForHeat
Shows whether the N heating circuit is enabled.
DevPortalEuDataActRead
heating.callForHeat.configuration.regulation
Shows the regulation modes for the CallForHeat function.
DevPortalEuDataActRead
heating.callForHeat.demand
Shows whether there is a demand for the CallForHeat function.
DevPortalEuDataActRead
heating.callForHeat.heating.curve.presets
Shows the heating curve available presets for the Call For Heat function.
DevPortalEuDataActRead
heating.callForHeat.pump
Shows whether the pump for CallForHeat is active or not.
DevPortalEuDataActRead
heating.callForHeat.sensors.temperature
Shows the current flow temperature for the Call For Heat function.
DevPortalEuDataActRead
heating.cascade
Shows whether the connected device is part of a cascade.
DevPortalEuDataActRead
heating.cascade.dhw.mode
Shows the electronic traceability number of the system.
DevPortalEuDataActRead
heating.cascade.members.N.burner
Shows the heating cascade member burner status.
DevPortalEuDataActRead
heating.cascade.members.N.burners.modulation.total
Shows the heating cascade member total modulation.
DevPortalEuDataActRead
heating.cascade.sensors.temperature.commonSupply
Shows the common flow temperature over all cascade members.
DevPortalEuDataActRead
heating.cascade.temperature.commonSupply
Contains the common supply temperature setpoint and the command to change the setpoint over all devices.
DevPortalHeatingRead, Heating
heating.circuits
Circuits information
DevPortalHeatingRead, Heating
heating.circuits.N.circulation.pump
Shows if circulation pump is on for circuit N.
DevPortalHeatingRead, Heating, DevPortalEuDataActRead
heating.circuits.N.circulation.secondaryPump
Shows if secondary circulation pump is on for circuit 0.
DevPortalEuDataActRead
heating.circuits.N.configuration.summerEco.absolute
Allows de-/activation of the summerEco-function and setting of the desired threshold.
DevPortalHeatingRead, DevPortalEuDataActRead
heating.circuits.N.cooling.hysteresis
Shows the device cooling activation thresholds. Provides commands to set them.
DevPortalEuDataActRead
heating.circuits.N.cooling.hysteresis.switch
Shows the hysteresis switch on / off relative to the current target value of heating circuit temperature for cooling. Provides commands to set them.
DevPortalHeatingRead, Heating
heating.circuits.N.dhw.pumps.circulation.schedule
Shows schedule of circulation for circuit N and provides command to set a new one.
DevPortalHeatingRead, Heating
heating.circuits.N.dhw.schedule
Shows schedule of domestic hot water for circuit N and provides command to set a new one.
DevPortalHeatingRead, Heating, DevPortalEuDataActRead
heating.circuits.N.frostprotection
Shows whether frost protection of installation is turn on in device.
DevPortalHeatingRead, Heating, DevPortalEuDataActRead
heating.circuits.N.heating.curve
Shows values related to heating curve and provides commands to modify it.
DevPortalEuDataActRead
heating.circuits.N.heating.curve.presets
Shows available presets for the heating curve of TT-circuits.
DevPortalEuDataActRead
heating.circuits.N.heating.hysteresis.switch
Shows the hysteresis switch on / off relative to the current target value of heating circuit temperature for heating. Provides commands to set them.
DevPortalHeatingRead, Heating
heating.circuits.N.heating.schedule
Shows heating schedule for circuit N and provides command to set a new one.
DevPortalHeatingRead, Heating
heating.circuits.N.operating.modes.active
Shows current active operating mode on the device and provides command to change it.
DevPortalHeatingRead, Heating
heating.circuits.N.operating.modes.cooling
Shows whether the cooling operating mode is active now.
DevPortalHeatingRead, Heating
heating.circuits.N.operating.modes.dhw
Shows whether the DHW operating mode is active now.
DevPortalHeatingRead, Heating
heating.circuits.N.operating.modes.dhwAndHeating
Shows whether the DHW and Heating operating mode is active now.
DevPortalHeatingRead, Heating
heating.circuits.N.operating.modes.dhwAndHeatingCooling
Shows whether the DHW and HeatingCooling operating mode is active now.
DevPortalHeatingRead, Heating
heating.circuits.N.operating.modes.forcedNormal
Shows whether the Forced Normal operating mode is on, which means that the external controller is taking care of the device.
DevPortalHeatingRead, Heating
heating.circuits.N.operating.modes.forcedReduced
Shows whether the Forced Reduced operating mode is on, which means that the external controller is taking care of the device.
DevPortalHeatingRead, Heating
heating.circuits.N.operating.modes.heating
Shows whether the Heating operating mode is active now.
DevPortalHeatingRead, Heating
heating.circuits.N.operating.modes.heatingCooling
Shows whether the HeatingCooling operating mode is active now.
DevPortalHeatingRead, Heating
heating.circuits.N.operating.modes.normalStandby
Shows whether the NormalStandby operating mode is active now.
DevPortalHeatingRead, Heating
heating.circuits.N.operating.modes.standby
Shows whether the Standby operating mode is active now, which means device will only start to protect installation from frost.
DevPortalHeatingRead, Heating
heating.circuits.N.operating.programs.active
Shows current active operating program enabled on the device.
DevPortalHeatingRead, Heating
heating.circuits.N.operating.programs.comfort
Shows information related to comfort program. Also provides the commands to enable/disable it and change the Comfort temperature value.
DevPortalHeatingRead, Heating
heating.circuits.N.operating.programs.comfortCooling
Shows the 'Comfort cooling' operating program activation and its desired temperature for the device. Provides commands to de-/activate it and set the temperature.
DevPortalHeatingRead, Heating
heating.circuits.N.operating.programs.comfortCoolingEnergySaving
Shows whether the device is in the 'Energy saving' operating mode while the 'Comfort cooling' program was scheduled.
DevPortalHeatingRead, Heating
heating.circuits.N.operating.programs.comfortEnergySaving
Shows whether the device is in the 'Energy saving' operating mode while the 'Comfort' program was scheduled.
DevPortalHeatingRead, Heating
heating.circuits.N.operating.programs.comfortHeating
Shows the 'Comfort heating' operating program activation and its desired temperature for the device. Provides commands to de-/activate it and set the temperature.
DevPortalHeatingRead, Heating, DevPortalEuDataActRead
heating.circuits.N.operating.programs.dhwPrecedence
Shows the 'DHW precedence' operating program activation.
DevPortalHeatingRead, Heating
heating.circuits.N.operating.programs.eco
Shows information related to Eco program. Also provides the commands to enable/disable it.
DevPortalHeatingRead, Heating
heating.circuits.N.operating.programs.external
Shows information related to External program, which is set when device is handled by external controller.
DevPortalHeatingRead, Heating
heating.circuits.N.operating.programs.fixed
Shows whether Fixed program is active.
DevPortalHeatingRead, Heating
heating.circuits.N.operating.programs.forcedLastFromSchedule
Shows information related to Forced Last From Schedule program. This is last program which was enabled by schedule and it's sustained until deactivation. It can be activated if device is in any of heating operating modes.
DevPortalHeatingRead, Heating
heating.circuits.N.operating.programs.frostprotection
Shows the 'Frost protection' operating program activation.
DevPortalEuDataActRead
heating.circuits.N.operating.programs.heatDissipation
Shows the 'Heat dissipation' program status.
DevPortalHeatingRead, Heating
heating.circuits.N.operating.programs.holiday
Shows information related to Holiday program and provides command to set it.
DevPortalHeatingRead, Heating, DevPortalEuDataActRead
heating.circuits.N.operating.programs.manual
Shows information related to manual program. Also provides the commands to enable/disable it and change the Manual temperature value.
DevPortalEuDataActRead
heating.circuits.N.operating.programs.mixerSaving
Shows the 'Mixer saving' program status.
DevPortalEuDataActRead
heating.circuits.N.operating.programs.noDemand
Shows that the standby mode is the standby for the zone mode.
DevPortalHeatingRead, Heating
heating.circuits.N.operating.programs.normal
Shows whether the Normal temperature program is active and provides command to set the temperature value.
DevPortalHeatingRead, Heating
heating.circuits.N.operating.programs.normalCooling
Shows the 'Normal cooling' operating program activation and its desired temperature for the device. Provides commands to de-/activate it and set the temperature.
DevPortalHeatingRead, Heating
heating.circuits.N.operating.programs.normalCoolingEnergySaving
Shows whether the device is in the 'Energy saving' operating mode while the 'Normal cooling' program was scheduled.
DevPortalHeatingRead, Heating
heating.circuits.N.operating.programs.normalEnergySaving
Shows whether the device is in the 'Energy saving' operating mode while the 'Normal' program was scheduled.
DevPortalHeatingRead, Heating
heating.circuits.N.operating.programs.normalHeating
Shows the 'Normal heating' operating program activation and its desired temperature for the device. Provides commands to de-/activate it and set the temperature.
DevPortalHeatingRead, Heating
heating.circuits.N.operating.programs.reduced
Shows whether the Reduced temperature program is active and provides command to set the temperature value
DevPortalHeatingRead, Heating
heating.circuits.N.operating.programs.reducedCooling
Shows the 'Reduced cooling' operating program activation and its desired temperature for the device. Provides commands to de-/activate it and set the temperature.
DevPortalHeatingRead, Heating
heating.circuits.N.operating.programs.reducedCoolingEnergySaving
Shows whether the device is in the 'Energy saving' operating mode while the 'Reduced cooling' program was scheduled.
DevPortalHeatingRead, Heating
heating.circuits.N.operating.programs.reducedEnergySaving
Shows whether the device is in the 'Energy saving' operating mode while the 'Reduced' program was scheduled.
DevPortalHeatingRead, Heating
heating.circuits.N.operating.programs.reducedHeating
Shows the 'Reduced heating' operating program activation and its desired temperature for the device. Provides commands to de-/activate it and set the temperature.
DevPortalEuDataActRead
heating.circuits.N.operating.programs.screedDrying.heatpump
Shows weather the heatpump is free to be used for screed-drying.
DevPortalHeatingRead, Heating
heating.circuits.N.operating.programs.standby
Shows whether Standby program is active. It is active in between heating schedule entries.
DevPortalHeatingRead, Heating
heating.circuits.N.operating.programs.summerEco
Shows that the summer eco mode is active or not.
DevPortalEuDataActRead
heating.circuits.N.operating.programs.summerSaving
Shows the 'Summer saving' program status.
Heat pump
heating.circuits.N.remoteController
Shows remote controller assigned to the heating circuit.
DevPortalEuDataActRead
heating.circuits.N.sensors.humidity.dewpoint
Shows the dewpoint detector status.
DevPortalHeatingRead, Heating
heating.circuits.N.sensors.temperature.room
Shows information about room temperature sensor.
DevPortalHeatingRead, Heating
heating.circuits.N.sensors.temperature.supply
Shows information about supply temperature sensor, i.e. water temperature on exit from boiler to heating installation.
DevPortalHeatingRead, Heating
heating.circuits.N.temperature
Shows the value of the circuit target temperature.
DevPortalHeatingRead, Heating
heating.circuits.N.temperature.levels
Shows the lower and the upper limit of the supply-temperature.
DevPortalHeatingRead, Heating
heating.circuits.N.zone.demand
Shows if at least one zone that is hooked up to this heating circuit has a demand for heat.
DevPortalHeatingRead, Heating
heating.circuits.N.zone.mode
Shows if zone is connected to heating circuit.
Fuel cell
heating.co2.saving
Shows statistics of CO2 saving. Deprecated in favor of heating.co2.saving.raw
DevPortalEuDataActRead
heating.co2.saving.raw
Shows raw statistics of CO2 saving
DevPortalHeatingRead, Heating
heating.compressors
Shows the list of enabled compressors.
Heat pump
heating.compressors.N.heat.production.cooling.week
Shows the power consumption of the first compressor for cooling during the current week.
Heat pump
heating.compressors.N.heat.production.current
Shows the current heat generation of the compressor.
Heat pump
heating.compressors.N.heat.production.dhw.week
Shows the heat production of the compressor for DHW during the current week.
Heat pump
heating.compressors.N.heat.production.heating.week
Shows the power consumption of the first compressor for heating during the current week.
DevPortalEuDataActRead
heating.compressors.N.heater.crankcase
Shows the first compressor's crankcase heater status.
Heat pump
heating.compressors.N.heatTarget
Shows what the compressor is currently heating.
DevPortalEuDataActRead
heating.compressors.N.operating.temperature.current
Shows the compressed and recompressed operating point temperature of the compressor.
DevPortalEuDataActRead
heating.compressors.N.power
Shows the compressor power. Provides a command to set it manually.
Heat pump
heating.compressors.N.power.consumption.cooling
Shows statistics of power usage for cooling down rooms by the first compressor. It is shown in `kWh`.
Heat pump
heating.compressors.N.power.consumption.cooling.week
Shows the power consumption of the first compressor for cooling during the current week.
Heat pump
heating.compressors.N.power.consumption.current
Shows the current power consumption of the first compressor.
Heat pump
heating.compressors.N.power.consumption.dhw
Shows statistics of power usage for heating up DHW by the first compressor. It is shown in `kWh`.
Heat pump
heating.compressors.N.power.consumption.dhw.week
Shows the power consumption of the first compressor for dhw during the current week.
Heat pump
heating.compressors.N.power.consumption.heating
Shows statistics of power usage for cooling up rooms by the first compressor. It is shown in `kWh`.
Heat pump
heating.compressors.N.power.consumption.heating.week
Shows the power consumption of the first compressor for heating during the current week.
Heat pump
heating.compressors.N.power.consumption.total
Shows statistics of total power usage by the first compressor. It is shown in `kWh`.
DevPortalEuDataActRead
heating.compressors.N.sensors.power
Shows information about the power and the status of the compressors.
DevPortalEuDataActRead
heating.compressors.N.sensors.pressure.inlet
Shows the first compressor inlet pressure sensor details.
DevPortalEuDataActRead
heating.compressors.N.sensors.temperature.ambient
Shows the temperature of the room the first compressor is placed in.
DevPortalEuDataActRead
heating.compressors.N.sensors.temperature.inlet
Shows the first compressor outlet pressure sensor details.
DevPortalEuDataActRead
heating.compressors.N.sensors.temperature.motorChamber
Shows the first compressor motor chamber temperature sensor details.
DevPortalEuDataActRead
heating.compressors.N.sensors.temperature.oil
Shows the first compressor oil temperature sensor details.
DevPortalEuDataActRead
heating.compressors.N.sensors.temperature.outlet
Shows the first compressor outlet temperature sensor details.
DevPortalEuDataActRead
heating.compressors.N.sensors.temperature.overheat
Shows the first compressor overheat temperature sensor details.
DevPortalEuDataActRead
heating.compressors.N.speed.current
Shows the first compressor motor liquid current speed.
DevPortalEuDataActRead
heating.compressors.N.speed.setpoint
Shows the first compressor motor liquid speed setpoint.
DevPortalHeatingRead, Heating, DevPortalEuDataActRead
heating.compressors.N.statistics
Shows statistics of compressor N.
DevPortalEuDataActRead
heating.compressors.N.statistics.load
Shows load-classes of compressor N.
DevPortalEuDataActRead
heating.compressors.N.volumeFlow.minimum
Shows the minimal liquid volume flow for the secondary heat exchanger.
DevPortalEuDataActRead
heating.condensors.N.sensors.temperature.liquid
Shows the status and the value of the condensors liquid temperature.
DevPortalEuDataActRead
heating.condensors.N.sensors.temperature.subcooling
Shows the subcooling of the first condensor.
DevPortalEuDataActRead
heating.configuration.buffer.temperature.max
Shows the maximum temperature of the Hot water buffer. Also provides the command to set it
DevPortalEuDataActRead
heating.configuration.bufferCylinderSize
Shows object configuration about buffer cylinder size in L.
DevPortalEuDataActRead
heating.configuration.centralHeatingCylinderSize
Shows object configuration about central heating cylinder size in L.
DevPortalEuDataActRead
heating.configuration.dhw.dryContact
Shows if aqua stat for the DHW is configured.
DevPortalEuDataActRead
heating.configuration.dhw.highDemand.threshold
Configures the high demand threshold value for the tapped volume
DevPortalEuDataActRead
heating.configuration.dhw.highDemand.timeframe
Configures the high demand timeframe value for the tapped volume
DevPortalEuDataActRead
heating.configuration.dhw.temperature.comfortCharging
(DEPRECATED) Sets the target DHW temperature for comfort charging.
DevPortalEuDataActRead
heating.configuration.dhw.temperature.dhwCylinder.max
Shows the maximum temperature of the Domestic Hot Water tank. Also provides the command to set it
DevPortalEuDataActRead
heating.configuration.dhw.temperature.hotWaterStorage.max
Shows the maximum temperature of the Domestic Hot Water tank. Also provides the command to set it, DEPRECATED in favor of heating.configuration.dhw.temperature.dhwCylinder.max
DevPortalEuDataActRead
heating.configuration.dhw.temperature.minimumComfort
DEPRECATED it will be replaced by heating.dhw.configuration.temperature.minimumComfort
DevPortalEuDataActRead
heating.configuration.dhwCylinderPump
Shows the limits of the dhwCylinder pump.
DevPortalEuDataActRead
heating.configuration.dhwCylinderSize
Shows object configuration about dhw cylinder size in L.
DevPortalEuDataActRead
heating.configuration.dhwHeater
Shows weather the electric heater inside the DHW-tank is free to be used.
DevPortalEuDataActRead
heating.configuration.flow.temperature.max
Shows the maximum flow temperature. Also provides the command to set it
DevPortalEuDataActRead
heating.configuration.flow.temperature.min
Shows the minimal flow temperature. Also provides the command to set it
DevPortalEuDataActRead
heating.configuration.fuel.capacity
Shows the device maximal fuel tank capacity. Provides a command to set it.
Heating+, DevPortalEuDataActRead
heating.configuration.fuel.need
Shows values related to the fuel-need.
DevPortalEuDataActRead
heating.configuration.gasType
Shows the configured gas-type.
DevPortalEuDataActRead
heating.configuration.heatingRod.dhw
Shows whether the electric heater for hot water is free to be used for heating DHW. For legacy devices, the general usage of the electrical heater needs to be granted first!
DevPortalEuDataActRead
heating.configuration.heatingRod.heating
Shows whether the electric heater for hot water is free to be used for heating rooms. For legacy devices, the general usage of the electrical heater needs to be granted first!
DevPortalEuDataActRead
heating.configuration.heatingRod.nominalPower
Shows the nominal power of the heating rod.
DevPortalEuDataActRead
heating.configuration.houseHeatingLoad
Shows object configuration heating load per square meter in kWh/year.
DevPortalEuDataActRead
heating.configuration.houseLocation
Shows object location.
DevPortalEuDataActRead
heating.configuration.houseOrientation
Shows object orientation in degrees.
DevPortalEuDataActRead
heating.configuration.hydraulicMatrix
Shows the values of the hydraulicMatrix
DevPortalEuDataActRead
heating.configuration.internalPumpOne
Shows the limits of the internal pump one.
DevPortalEuDataActRead
heating.configuration.internalPumps
Shows the limits of the pump.
DevPortalEuDataActRead
heating.configuration.internalPumpTwo
Shows the limits of the internal pump two.
DevPortalEuDataActRead
heating.configuration.pressure.total
Contains information about the pressure inside the system.
DevPortalEuDataActRead
heating.configuration.smartGrid.heatingRod
Up to which level can SG Ready influence the heating-rod?
DevPortalEuDataActRead
heating.configuration.temperature.outside.DampingFactor
Shows the damping factor for outside temperature. Also provides a command to change it.
DevPortalHeatingRead, Heating, DevPortalEuDataActRead
heating.controller.serial
Shows serial number of the controller.
DevPortalEuDataActRead
heating.coolingCircuits.N.reverse
Shows whether a the cooling circuit is used reverse or not
DevPortalEuDataActRead
heating.coolingCircuits.N.type
Shows the cooling circuit controller type.
Heat pump, DevPortalEuDataActRead
heating.cop.cooling
Shows the cooling cop.
Heat pump, DevPortalEuDataActRead
heating.cop.dhw
Shows the dhw COP.
Heat pump, DevPortalEuDataActRead
heating.cop.green
Shows the green electricity COP.
Heat pump, DevPortalEuDataActRead
heating.cop.heating
Shows the heating COP.
Heat pump, DevPortalEuDataActRead
heating.cop.total
Shows the total COP.
DevPortalEuDataActRead
heating.device.chargingScheme
Presents charging scheme of the suction module.
DevPortalEuDataActRead
heating.device.fuel.current
Shows the current fuel tank level. Provides commands to adjust it.
DevPortalEuDataActRead
heating.device.fuel.minimal
Shows the minimal filling value of the fuel tank on which the user get a notification to refill.
DevPortalEuDataActRead
heating.device.mainECU
Shows information about the mainECU.
DevPortalHeatingRead, Heating, DevPortalEuDataActRead
heating.device.software
Presents further information about the device-software.
DevPortalEuDataActRead
heating.device.status
Shows the current device status.
DevPortalHeatingRead, DevPortalEuDataActRead
heating.device.time
Provides command to set time and date.
DevPortalHeatingRead, Heating, DevPortalEuDataActRead
heating.device.variant
Presents further information about the device-variant.
DevPortalHeatingRead, Heating
heating.dhw
Shows whether the domestic hot water is activated/present on the heating installation.
DevPortalEuDataActRead
heating.dhw.actuator
Shows the current state and status of the actuator for DHW preparation.
DevPortalHeatingRead, Heating, DevPortalEuDataActRead
heating.dhw.charging
Shows whether the hot water charging in DHW storage is active.
DevPortalHeatingRead, Heating, DevPortalEuDataActRead
heating.dhw.comfort
(Deprecated - it will be replaced by heating.dhw.operating.modes.comfort/eco/active). Shows if heat-exchanger for the DHW is kept warm all the time is active. Also provides the commands to activate/deactivate it.
DevPortalEuDataActRead
heating.dhw.configuration.dryContact
Shows if aqua stat for the DHW is configured.
DevPortalEuDataActRead
heating.dhw.configuration.highDemand.threshold
Configures the high demand threshold value for the tapped volume
DevPortalEuDataActRead
heating.dhw.configuration.highDemand.timeframe
Configures the high demand timeframe value for the tapped volume
DevPortalEuDataActRead
heating.dhw.configuration.pumps.circulation.parallelDhwHeating
Shows if the dhw circulation pump is running in parallel with dhw heating. Also provides the command to de-/activate it.
DevPortalEuDataActRead
heating.dhw.configuration.pumps.circulation.parallelHygiene
Shows if the dhw circulation pump is running in parallel with hygiene. Also provides the commands to de-/activate it.
DevPortalEuDataActRead
heating.dhw.configuration.pumps.circulation.triggerCycleDuration
Shows the trigger for cycle duration of the dhw circulation pump. Also provides command to set it.
DevPortalEuDataActRead
heating.dhw.configuration.temperature.comfortCharging
Sets the target DHW temperature for comfort charging.
DevPortalEuDataActRead
heating.dhw.configuration.temperature.dhwCylinder.max
Shows the maximum temperature of the Domestic Hot Water tank. Also provides the command to set it
DevPortalEuDataActRead
heating.dhw.configuration.temperature.minimumComfort
Shows the heat pump's minimum comfort temperature. Provided a command to set it.
DevPortalEuDataActRead
heating.dhw.dhwCylinder.frostprotection
Shows whether frost protection for dhwCylinder is turn on in device.
DevPortalEuDataActRead
heating.dhw.dryContact
Shows if aqua stat for the DHW is active.
DevPortalHeatingRead, Heating
heating.dhw.hygiene
This feature allow to enable the hygiene-function. The hygiene-function heats up the DHW to a setpoint (heating.dhw.temperature.hygiene) high enough to kill any legionella bacteria in the system. If the function is enabled it will be activated according to the defined trigger (heating.dhw.hygiene.trigger). If the function is currently executed, the active-flag will be set to true. Manual activation is possible using the activate-command.
DevPortalHeatingRead, Heating
heating.dhw.hygiene.trigger
This feature defines when the hygiene function will be executed if it is enabled (heating.dhw.hygiene). The function can be executed once per week on a defined weekday and time or daily. In the latter case, the property weekdays contains all weekdays, otherwise only the one weekday on which the function should run.
DevPortalHeatingRead, Heating
heating.dhw.oneTimeCharge
Shows whether one time charge of dhw is active. Also provides the commands to activate/deactivate it.
DevPortalHeatingRead, Heating
heating.dhw.operating.modes.active
Shows the active operating mode for DHW. Provides a command to set it.
DevPortalHeatingRead, Heating
heating.dhw.operating.modes.balanced
Shows the 'Balanced' operating mode activation for DHW.
DevPortalEuDataActRead
heating.dhw.operating.modes.comfort
Shows the 'Comfort' operating mode activation for DHW.
DevPortalEuDataActRead
heating.dhw.operating.modes.eco
Shows the 'Eco' operating mode activation for DHW.
DevPortalHeatingRead, Heating
heating.dhw.operating.modes.efficient
Shows the state of 'Efficient' domestic hot water charge operating mode.
DevPortalHeatingRead, Heating
heating.dhw.operating.modes.efficientWithMinComfort
Shows the state of 'Efficient with min. comfort' domestic hot water charge operating mode.
DevPortalHeatingRead, Heating
heating.dhw.operating.modes.off
Shows whether the off operating mode is active now.
DevPortalHeatingRead, Heating, DevPortalEuDataActRead
heating.dhw.pumps.circulation
Shows the status of the Domestic Hot Water circulation pump.
DevPortalHeatingRead, Heating
heating.dhw.pumps.circulation.schedule
Shows pumps circulation schedule of domestic hot water.
DevPortalHeatingRead, Heating, DevPortalEuDataActRead
heating.dhw.pumps.primary
Shows the status of the Domestic Hot Water primary pump.
DevPortalHeatingRead, Heating, DevPortalEuDataActRead
heating.dhw.pumps.secondary
Shows whether the domestic hot water pump in the secondary circuit is on or off. This configuration is used for compact devices.
DevPortalEuDataActRead
heating.dhw.scaldProtection
Shows if the DHW Scald protection functionality is active. Provides command to de-/activate it.
DevPortalHeatingRead, Heating
heating.dhw.schedule
Shows schedule of domestic hot water.
DevPortalEuDataActRead
heating.dhw.sensors.dhwCylinder.rustSurveillance.anode
Shows information about current value and status of the anode control sensor.
DevPortalHeatingRead, Heating
heating.dhw.sensors.temperature.dhwCylinder
Shows information about hot water storage sensor.
DevPortalHeatingRead, Heating
heating.dhw.sensors.temperature.dhwCylinder.bottom
Shows information about hot water storage sensor.
DevPortalHeatingRead, Heating, DevPortalEuDataActRead
heating.dhw.sensors.temperature.dhwCylinder.midBottom
Shows information about hot water storage sensor.
DevPortalHeatingRead, Heating, DevPortalEuDataActRead
heating.dhw.sensors.temperature.dhwCylinder.middle
Shows information about hot water storage sensor.
DevPortalHeatingRead, Heating
heating.dhw.sensors.temperature.dhwCylinder.top
Shows information about hot water storage sensor.
DevPortalHeatingRead, Heating
heating.dhw.sensors.temperature.hotWaterStorage
Shows information about hot water storage sensor.
DevPortalHeatingRead, Heating
heating.dhw.sensors.temperature.hotWaterStorage.bottom
Shows information about hot water storage sensor.
DevPortalHeatingRead, Heating, DevPortalEuDataActRead
heating.dhw.sensors.temperature.hotWaterStorage.midBottom
Shows information about hot water storage sensor.
DevPortalHeatingRead, Heating, DevPortalEuDataActRead
heating.dhw.sensors.temperature.hotWaterStorage.middle
Shows information about hot water storage sensor.
DevPortalHeatingRead, Heating
heating.dhw.sensors.temperature.hotWaterStorage.top
Shows information about hot water storage sensor.
DevPortalHeatingRead, Heating
heating.dhw.sensors.temperature.outlet
Shows information related to Domestic Hot Water temperature sensor.
DevPortalEuDataActRead
heating.dhw.sensors.temperature.tankLoadSystem.return
Shows information about tankloadsystem sensor.
DevPortalEuDataActRead
heating.dhw.sensors.temperature.tankLoadSystem.supply
Shows information about tank load system sensor.
DevPortalHeatingRead, Heating, DevPortalEuDataActRead
heating.dhw.temperature.hygiene
This feature defines the temperature to which the dhw will be heated up in order to kill any legionella bacterias in the pipes. The scald protection will be overriden by this function. An active scald protection will cap the maximum dhw temperature at 65° Celsius.
DevPortalHeatingRead, Heating
heating.dhw.temperature.hysteresis
Shows the hysteresis value of the Domestic Hot Water temperature in heat pumps. Also provides the command to set it
DevPortalHeatingRead, Heating, DevPortalEuDataActRead
heating.dhw.temperature.levels
Shows available DHW ranges and defaults for E3 systems.
DevPortalHeatingRead, Heating
heating.dhw.temperature.main
Shows the desired value of the Domestic Hot Water temperature. Also provides the command to set it
DevPortalHeatingRead, Heating, DevPortalEuDataActRead
heating.dhw.temperature.temp2
Shows the desired value of the Domestic Hot Water Temp 2 temperature. Also provides the command to set it
DevPortalEuDataActRead
heating.economizers.N.sensors.temperature.liquid
Shows information about hydraulic separator temperature sensor.
DevPortalEuDataActRead
heating.evaporators.N.heater.base
Shows the state of the evaporator's base heater.
DevPortalEuDataActRead
heating.evaporators.N.sensors.temperature.liquid
Shows the evaporator liquid temperature sensor details.
DevPortalEuDataActRead
heating.evaporators.N.sensors.temperature.overheat
Shows the evaporator overheat temperature sensor details.
DevPortalEuDataActRead
heating.external.lock
Contains information whether device currently is locked by some external lock influence.
Heating+
heating.flue.sensors.o2.lambda
Shows the current calculated value of oxygen and the lambda sensor connection status in the heating system.
Heating+
heating.flue.sensors.temperature.main
Shows the status and measured temperature of the flue gas sensor.
DevPortalEuDataActRead
heating.fuelCell.burner.process
(DEPRECATED it will be replaced by fuelCell.burner.process) Shows burner process values like activation, air volume flow, fan speed and fan power.
DevPortalEuDataActRead
heating.fuelCell.coolingWater
(DEPRECATED it will be replaced by fuelCell.coolingWater) Shows details of the cooling water of the fuel cell.
DevPortalEuDataActRead
heating.fuelCell.electricalEnergyConsumption.value
DEPRECATED it will be replaced by fuelCell.electricalEnergyConsumption.value
DevPortalEuDataActRead
heating.fuelCell.errors.raw
DEPRECATED it will be replaced by fuelCell.errors.raw
DevPortalEuDataActRead
heating.fuelCell.gas.details
(DEPRECATED it will be replaced by fuelCell.gas.details) Shows details about the first gas volume flow, second gas volume flow, gas hydrogen concentration and the booster pump power.
DevPortalEuDataActRead
heating.fuelCell.gas.exhaust
(DEPRECATED it will be replaced by fuelCell.gas.exhaust) Shows information of the exhaust gas.
DevPortalEuDataActRead
heating.fuelCell.information.software.thirdParty
(DEPRECATED it will be replaced by fuelCell.information.software.thirdParty) Shows the software versions of the different boards of the fuel cell.
DevPortalEuDataActRead
heating.fuelCell.managers.energy
DEPRECATED it will be replaced by fuelCell.managers.energy
DevPortalEuDataActRead
heating.fuelCell.managers.energy.prediction.power.consumption
DEPRECATED it will be replaced by fuelCell.managers.energy.prediction.power.consumption
DevPortalEuDataActRead
heating.fuelCell.managers.energy.prediction.runtime
DEPRECATED it will be replaced by fuelCell.managers.energy.prediction.runtime
DevPortalEuDataActRead
heating.fuelCell.managers.energy.timeTillNextStart
DEPRECATED it will be replaced by fuelCell.managers.energy.timeTillNextStart
Fuel cell
heating.fuelCell.operating.modes.active
(DEPRECATED it will be replaced by fuelCell.operating.modes.active) Shows current active oprtating mode on the device and provides command to change it.
Fuel cell
heating.fuelCell.operating.modes.chimneySweeperMode
(DEPRECATED it will be replaced by fuelCell.operating.modes.chimneySweeperMode) Shows whether the holidayWithFuelCellOn operating mode is active now.
Fuel cell
heating.fuelCell.operating.modes.ecological
(DEPRECATED it will be replaced by fuelCell.operating.modes.ecological) Shows whether the ecological operating mode is active now.
Fuel cell
heating.fuelCell.operating.modes.economical
(DEPRECATED it will be replaced by fuelCell.operating.modes.economical) Shows whether the economical operating mode is active now.
Fuel cell
heating.fuelCell.operating.modes.energyControlled
(DEPRECATED it will be replaced by fuelCell.operating.modes.energyControlled) Shows whether the energyControlled operating mode is active now.
Fuel cell
heating.fuelCell.operating.modes.heatControlled
(DEPRECATED it will be replaced by fuelCell.operating.modes.heatControlled) Shows whether the heatControlled operating mode is active now.
Fuel cell
heating.fuelCell.operating.modes.holidayWithFuelCellOff
(DEPRECATED it will be replaced by fuelCell.operating.modes.holidayWithFuelCellOff) Shows whether the holidayWithFuelCellOff operating mode is active now.
Fuel cell
heating.fuelCell.operating.modes.holidayWithFuelCellOn
(DEPRECATED it will be replaced by fuelCell.operating.modes.holidayWithFuelCellOn) Shows whether the holidayWithFuelCellOn operating mode is active now.
Fuel cell
heating.fuelCell.operating.modes.maintenance
(DEPRECATED it will be replaced by fuelCell.operating.modes.maintenance) Shows whether the maintenance operating mode is active now.
Fuel cell
heating.fuelCell.operating.modes.party
(DEPRECATED it will be replaced by fuelCell.operating.modes.party) Shows whether the party operating mode is active now.
Fuel cell
heating.fuelCell.operating.modes.standby
(DEPRECATED it will be replaced by fuelCell.operating.modes.standby) Shows whether the Standby operating mode is active now.
Fuel cell, DevPortalEuDataActRead
heating.fuelCell.operating.phase
(DEPRECATED it will be replaced by fuelCell.operating.phase) Shows information about current phase which the fuel cell is in.
DevPortalEuDataActRead
heating.fuelCell.oxidation.preferential
(DEPRECATED it will be replaced by fuelCell.oxidation.preferential) Shows information about the preferential oxidation.
Fuel cell
heating.fuelCell.power.production
(DEPRECATED it will be replaced by fuelCell.power.production) Shows the amount of energy produced by the fuel-cell in kwH
DevPortalEuDataActRead
heating.fuelCell.power.production.lastTwoYears
Shows the generated electrical energy over the last two years.
DevPortalEuDataActRead
heating.fuelCell.prediction.heating.deficit
DEPRECATED it will be replaced by fuelCell.prediction.heating.deficit
Fuel cell, DevPortalEuDataActRead
heating.fuelCell.sensors.temperature.return
(DEPRECATED it will be replaced by fuelCell.sensors.temperature.return) Shows information about flow return temperature sensor, i.e. water temperature on return to the boiler from heating installation.
Fuel cell, DevPortalEuDataActRead
heating.fuelCell.sensors.temperature.supply
(DEPRECATED it will be replaced by fuelCell.sensors.temperature.supply) Shows information about flow temperature sensor, i.e. water temperature on return to the boiler from heating installation.
DevPortalEuDataActRead
heating.fuelCell.sequence
(DEPRECATED it will be replaced by fuelCell.sequence) Shows the sequence numbers of the fuel cell.
Fuel cell, DevPortalEuDataActRead
heating.fuelCell.statistics
(DEPRECATED it will be replaced by fuelCell.statistics) Shows statistics of fuel Cell.
DevPortalEuDataActRead
heating.fuelCell.temperature.processor
(DEPRECATED it will be replaced by fuelCell.temperature.processor) Shows different temperatures of fuel cell processor.
Heating
heating.gas.consumption.dhw
Shows statistics of gas usage for heating up the DHW. It is shown in `Wh`.
Fuel cell
heating.gas.consumption.fuelCell
Shows statistics of gas usage of the fuel-cell.
DevPortalEuDataActRead
heating.gas.consumption.fuelCell.lastTwoYears
Shows the fuel cell gas consumption over the last two years.
Heating
heating.gas.consumption.heating
Shows statistics of gas usage for heating up the DHW. It is shown in `Wh`.
DevPortalHeatingRead, Heating, DevPortalEuDataActRead
heating.gas.consumption.summary.dhw
Shows cumulated statistics of consumed gas for DHW
DevPortalHeatingRead, Heating, DevPortalEuDataActRead
heating.gas.consumption.summary.heating
Shows cumulated statistics of generated heat energy for space climate heating
Heating
heating.gas.consumption.total
Shows statistics of gas usage. It is shown in cubicMeters.
Heating+
heating.heat.production.cooling
Shows statistics of generated heat energy for cooling
Heating+
heating.heat.production.current
Shows the current heat-generation of the system
DevPortalEuDataActRead
heating.heat.production.currentYear.cooling
heating.heat.production.currentYear.cooling
DevPortalEuDataActRead
heating.heat.production.currentYear.dhw
heating.heat.production.currentYear.dhw
DevPortalEuDataActRead
heating.heat.production.currentYear.heating
heating.heat.production.currentYear.heating
Heating+
heating.heat.production.dhw
Shows statistics of generated heat energy for space climate heating.
Heating+
heating.heat.production.heating
Shows statistics of generated heat energy for space climate heating.
DevPortalEuDataActRead
heating.heat.production.summary.cooling
Shows cumulated statistics of generated heat energy for cooling.
DevPortalEuDataActRead
heating.heat.production.summary.dhw
Shows cumulated statistics of generated heat energy for DHW.
DevPortalEuDataActRead
heating.heat.production.summary.heating
Shows cumulated statistics of generated heat energy for space climate heating.
Heating+
heating.heat.production.total
Shows statistics of the total generated heat energy.
DevPortalEuDataActRead
heating.heater.condensatePan
Shows if condensate pan heater is available. Provide a command to de-/active it.
DevPortalEuDataActRead
heating.heater.fanRing
Shows if fan ring heater is available. Provide a command to de-/active it.
DevPortalEuDataActRead
heating.heatingRod
Shows if heating rod available.
Heat pump
heating.heatingRod.heat.production.current
Shows the current heat-generation of the heating-rod (HWDE).
Heat pump
heating.heatingRod.heatTarget
Shows what the heating-rod is currently heating.
DevPortalEuDataActRead
heating.heatingRod.maximumOutsideTemperature
Shows the maximum outside temperature when the e-heater can be switched on.
Heat pump
heating.heatingRod.power.consumption.current
Shows the current power consumption of the heating-rod (HWDE)
DevPortalEuDataActRead
heating.heatingRod.power.consumption.currentYear.dhw
heating.heatingRod.power.consumption.currentYear.dhw
DevPortalEuDataActRead
heating.heatingRod.power.consumption.currentYear.heating
heating.heatingRod.power.consumption.currentYear.heating
Heat pump
heating.heatingRod.power.consumption.dhw
Shows statistics of power usage for heating up DHW by the heating rod (HWDE). It is shown in `kWh`.
Heat pump
heating.heatingRod.power.consumption.heating
Shows statistics of power usage for heating up rooms by the heating-rod (HWDE). It is shown in `kWh`.
Heat pump, DevPortalEuDataActRead
heating.heatingRod.power.consumption.summary.dhw
Shows cumulated statistics of generated heat energy for space climate heating
Heat pump, DevPortalEuDataActRead
heating.heatingRod.power.consumption.summary.heating
Shows cumulated statistics of generated heat energy for space climate heating
Heat pump
heating.heatingRod.power.consumption.total
Shows statistics of power usage for heating up rooms by the heating-rod (HWDE). It is shown in `kWh`.
DevPortalEuDataActRead
heating.heatingRod.runtime
Shows the heating rod run time for two levels.
Heat pump, DevPortalEuDataActRead
heating.heatingRod.statistics
Shows the starts and count of starts of the heating rod.
Heat pump
heating.heatingRod.status
Shows the active heating level of instantaneous e-heater.
DevPortalHeatingRead, Heating, DevPortalEuDataActRead
heating.increasedReturn.temperature
Shows information about desired return Temperature of the interim system e.g. Temperature behind a built-in buffer when a system is supported with a return increase.
DevPortalEuDataActRead
heating.inverters.N.sensors.power.current
Shows information about the current power and the status of the heat pump inverter.
DevPortalEuDataActRead
heating.inverters.N.sensors.power.output
Shows information about the power and the status of the heat pump inverter.
DevPortalEuDataActRead
heating.inverters.N.sensors.temperature.powerModule
Shows information about the current temperature and the status of the heat pump inverter power module.
DevPortalEuDataActRead
heating.noise.reduction.levels.maxReduced
Shows if the device is currently running in noise-reduction-level 'maxReduced'.
DevPortalEuDataActRead
heating.noise.reduction.levels.notReduced
Shows if the device is currently running in noise-reduction-level 'notReduced'.
DevPortalEuDataActRead
heating.noise.reduction.levels.slightlyReduced
Shows if the device is currently running in noise-reduction-level 'slightlyReduced'.
DevPortalEuDataActRead
heating.noise.reduction.operating.programs.active
DEPRECATED it will be replaced by heating.noise.reduction.operating.state
DevPortalEuDataActRead
heating.noise.reduction.operating.programs.maxReduced
DEPRECATED!
DevPortalEuDataActRead
heating.noise.reduction.operating.programs.notReduced
DEPRECATED!
DevPortalEuDataActRead
heating.noise.reduction.operating.programs.slightlyReduced
DEPRECATED!
DevPortalHeatingRead, Heating
heating.operating.programs.holiday
Shows information related to Holiday program and provides command to set it.
DevPortalHeatingRead, Heating
heating.operating.programs.holidayAtHome
Shows information related to HolidayAtHome program and provides command to set it. If Holiday and HolidayAtHome are overlapping, holiday at home has priority
DevPortalEuDataActRead
heating.outdoor.defrosting
Shows if the defrosting mode is active
DevPortalEuDataActRead
heating.outdoor.defrosting.thermalEnergy
Shows the thermal energy of the defrosting mode and its unit
DevPortalHeatingRead, Heating
heating.power.consumption.cooling
Shows statistics of power usage for cooling. It is shown in `kWh`.
Heat pump
heating.power.consumption.current
Shows the current consumption of electrical energy.
DevPortalEuDataActRead
heating.power.consumption.currentYear.cooling
heating.power.consumption.currentYear.cooling
DevPortalEuDataActRead
heating.power.consumption.currentYear.dhw
heating.power.consumption.currentYear.dhw
DevPortalEuDataActRead
heating.power.consumption.currentYear.heating
heating.power.consumption.currentYear.heating
Heating
heating.power.consumption.dhw
Shows statistics of power usage for heating up the DHW. It is shown in `kWh`.
Heating
heating.power.consumption.heating
Shows statistics of power usage for heating up rooms. It is shown in `kWh`.
DevPortalEuDataActRead
heating.power.consumption.summary.cooling
Shows cumulated statistics of power usage for cooling.
DevPortalHeatingRead, Heating
heating.power.consumption.summary.dhw
Shows cumulated statistics of generated heat energy for space climate heating
DevPortalHeatingRead, Heating
heating.power.consumption.summary.heating
Shows cumulated statistics of generated heat energy for space climate heating
Heating
heating.power.consumption.total
Shows statistics of power usage. It is shown in kWh. It supersedes heating.power.consumption.
Fuel cell, DevPortalEuDataActRead
heating.power.production.cumulative
(NEW version of heating.power.cumulativeProduced) Shows information about produced power.
Fuel cell
heating.power.production.current
(NEW version of heating.sensors.power.output) Shows information about power output.
DevPortalEuDataActRead
heating.power.production.demandCoverage.current
Shows the heating device currently needed energy production.
DevPortalEuDataActRead
heating.power.production.demandCoverage.raw
Shows raw statistics of demand coverage
DevPortalEuDataActRead
heating.power.production.productionCoverage.current
Shows the currently produced energy consumption by the household.
DevPortalEuDataActRead
heating.power.production.productionCoverage.raw
Shows raw statistics of production coverage
Fuel cell, DevPortalEuDataActRead
heating.power.purchase.cumulative
(NEW version of heating.power.cumulativePurchased) Shows information about purchased power.
Fuel cell, DevPortalEuDataActRead
heating.power.purchase.current
Shows information about currently purchased power.
Fuel cell, DevPortalEuDataActRead
heating.power.sold.cumulative
(NEW version of heating.power.cumulativeSold) Shows information about power feed into power grid.
Fuel cell, DevPortalEuDataActRead
heating.power.sold.current
Shows information about power currently feed into power grid.
DevPortalEuDataActRead
heating.primaryCircuit.configuration.preVentilation
Shows the time for pre-ventilation after which the heatpump decides to start. Provides command to set time
DevPortalEuDataActRead
heating.primaryCircuit.fans.N.current
Shows the primary circuit current fan and its status.
DevPortalEuDataActRead
heating.primaryCircuit.sensors.rotation
Shows the primary circuit fan rotation speed.
DevPortalHeatingRead, Heating, DevPortalEuDataActRead
heating.primaryCircuit.sensors.temperature.return
Shows information about the primary source's return-temperature of a heatpump.
DevPortalHeatingRead, Heating, DevPortalEuDataActRead
heating.primaryCircuit.sensors.temperature.supply
Shows information about the primary source's supply-temperature of a heatpump.
DevPortalEuDataActRead
heating.primaryCircuit.valves.fourThreeWay
Shows whether the primary circuit four three way valve is active or not.
DevPortalEuDataActRead
heating.scop.dhw
(DEPRECATED it will be replaced by heating.spf.dhw) Shows the SCOP for DHW.
DevPortalEuDataActRead
heating.scop.heating
(DEPRECATED it will be replaced by heating.spf.heating) Shows the SCOP for heating.
DevPortalEuDataActRead
heating.scop.total
(DEPRECATED it will be replaced by heating.spf.total) Shows the SCOP of heating and DHW.
DevPortalEuDataActRead
heating.secondaryCircuit.operation.state
Shows information about the secondary source's supply-temperature of a heatpump.
DevPortalHeatingRead, Heating, DevPortalEuDataActRead
heating.secondaryCircuit.sensors.temperature.supply
Shows information about the secondary source's supply-temperature of a heatpump.
DevPortalEuDataActRead
heating.secondaryCircuit.temperature.return.minimum
Shows the minimal return temperature of the secondary circuit.
DevPortalEuDataActRead
heating.secondaryCircuit.transition.state
Shows the last and current transition state of the refrigeration circuit.
DevPortalEuDataActRead
heating.secondaryCircuit.valves.fourThreeWay
Shows the secondary circuit Four Three Way valve state.
DevPortalEuDataActRead
heating.secondaryHeatGenerator
Shows if the device is configured with a secondary heat generator.
DevPortalEuDataActRead
heating.secondaryHeatGenerator.active
Shows the secondary heat generator state.
DevPortalEuDataActRead
heating.secondaryHeatGenerator.configuration.defrosting
Shows if the secondary heat generator is able to support defrosting. Also provides the command to set it
DevPortalEuDataActRead
heating.secondaryHeatGenerator.configuration.dhw
Shows if the secondary heat generator is able to support dhw. Also provides the command to set it.
DevPortalEuDataActRead
heating.secondaryHeatGenerator.configuration.dhw.comfortEnsuring
Shows if the secondary heat generator is able to support dhw comfort ensuring mode. Also provides the command to set it
DevPortalEuDataActRead
heating.secondaryHeatGenerator.configuration.frostprotection
Shows if the secondary heat generator is able to support frost protection. Also provides the command to set it
DevPortalEuDataActRead
heating.secondaryHeatGenerator.configuration.heating
Shows if the secondary heat generator is able to support heating. Also provides the command to set it.
DevPortalEuDataActRead
heating.secondaryHeatGenerator.configuration.heating.comfortEnsuring
Shows if the secondary heat generator is able to support heating comfort ensuring mode. Also provides the command to set it
DevPortalEuDataActRead
heating.secondaryHeatGenerator.configuration.hygiene
Shows if the secondary heat generator is able to support hygiene mode. Also provides the command to set it.
DevPortalEuDataActRead
heating.secondaryHeatGenerator.configuration.parallelWorking
Shows the second heat generator parallel work capability. Provides commands to it.
DevPortalEuDataActRead
heating.secondaryHeatGenerator.configuration.refrigerationCircuitExceeded
Shows if the secondary heat generator is able to support additional heater if the application limits of the refrigeration circuit have been exceeded. Also provides the command to set it
DevPortalEuDataActRead
heating.secondaryHeatGenerator.configuration.runtime
Shows the second heat generator's minimal runtime, minimal break time, and delay time. Provide commands to configure them.
DevPortalEuDataActRead
heating.secondaryHeatGenerator.configuration.screedDrying
Shows if the secondary heat generator is able to support screed drying. Also provides the command to set it
DevPortalEuDataActRead
heating.secondaryHeatGenerator.configuration.temperature
Shows the first device allowed temperature difference between target and current values without starting the second heat generator. Provides commands to configure them.
DevPortalEuDataActRead
heating.secondaryHeatGenerator.electricity.energyFactor
Shows the secondary heat generator configured electricity energy factor for ecological calculation. Provides a command to set it.
DevPortalEuDataActRead
heating.secondaryHeatGenerator.electricity.price.low
Shows the configured minimum tariff price for electricity per kilowatt-hour for economical calculation. Provides a command to set it.
DevPortalEuDataActRead
heating.secondaryHeatGenerator.electricity.price.normal
Shows the configured normal tariff price for electricity per kilowatt-hour for economical calculation. Provides a command to set it.
DevPortalEuDataActRead
heating.secondaryHeatGenerator.fossil.energyFactor
Shows the configured fossil energy factor for ecological calculation. Provides a command to set it.
DevPortalEuDataActRead
heating.secondaryHeatGenerator.fossil.price.normal
Shows the configured normal tariff price for fossil per kilowatt-hour for economical calculation. Provides a command to set it.
DevPortalEuDataActRead
heating.secondaryHeatGenerator.state
Shows the current state of the secondary heat generator.
DevPortalEuDataActRead
heating.secondaryHeatGenerator.status
Shows the status of a second heat generator.
DevPortalEuDataActRead
heating.secondaryHeatGenerator.temperature.current
Shows the current temperature of a second heat generator
DevPortalEuDataActRead
heating.secondaryHeatGenerator.valves.threeWay
Shows the current and target position of the three-way valve in the secondary heat generator.
DevPortalEuDataActRead
heating.sensors.pressure.hotGas
(DEPRECATED it will be replaced by heating.compressors.N.sensors.pressure.outlet) Shows information about the value and the status of the suction pressure sensor.
DevPortalEuDataActRead
heating.sensors.pressure.suctionGas
(DEPRECATED it will be replaced by heating.compressors.N.sensors.pressure.inlet) Shows information about the value and the status of the suction pressure sensor.
Heating+, DevPortalEuDataActRead
heating.sensors.pressure.supply
Shows the water-pressure in the boiler's supply.
Heating+, DevPortalEuDataActRead
heating.sensors.temperature.allengra
Shows the return temperature of allengra
DevPortalEuDataActRead
heating.sensors.temperature.hotGas
(DEPRECATED it will be replaced by heating.compressors.N.sensors.temperature.outlet) Shows information about the value and the status of the hotgas temperature sensor.
DevPortalHeatingRead, Heating
heating.sensors.temperature.hydraulicSeparator
Shows information about hydraulic separator temperature sensor.
DevPortalHeatingRead, Heating, DevPortalEuDataActRead
heating.sensors.temperature.increasedReturn
Shows information about Return set Temperature of the interim system e.g. Temperature behind a built-in buffer when a system is supported with a return increase.
DevPortalEuDataActRead
heating.sensors.temperature.liquidGas
(DEPRECATED it will be replaced by heating.evaporators.N.sensors.temperature.liquid) Shows information about the value and the status of the suctiongas temperature sensor.
DevPortalHeatingRead, Heating
heating.sensors.temperature.outside
Shows information related to outside temperature sensor.
DevPortalHeatingRead, Heating, DevPortalEuDataActRead
heating.sensors.temperature.return
Shows information about flow return temperature sensor, i.e. water temperature on return to the boiler from heating installation.
DevPortalEuDataActRead
heating.sensors.temperature.suctionGas
(DEPRECATED it will be replaced by heating.compressors.N.sensors.temperature.inlet) Shows information about the value and the status of the suctiongas temperature sensor.
DevPortalEuDataActRead
heating.sensors.temperature.systemReturn
Shows information about (Common return temperature) return sum of temperature of a cascade.
Heating+
heating.sensors.valve.bufferDischargeThreeWayValve
Shows information about percentage position of the buffer discharge 3-way valve.
DevPortalEuDataActRead
heating.sensors.valve.N.expansion.setpoint
Shows the valve expansion setpoint in percent.
DevPortalEuDataActRead
heating.sensors.valve.N.expansion.target
Shows the valve target expansion in percent.
DevPortalEuDataActRead
heating.sensors.volumetricFlow.allengra
Shows information about volumetric flow on the return.
DevPortalHeatingRead, Heating, DevPortalEuDataActRead
heating.solar
Shows status of solar
DevPortalHeatingRead, Heating, DevPortalEuDataActRead
heating.solar.power.cumulativeProduced
Shows of solar heat quantity in kWh
DevPortalHeatingRead, Heating
heating.solar.power.production
Shows statistics of solar power production
DevPortalHeatingRead, Heating
heating.solar.pumps.circuit
Shows of solar heat quantity in kWh
Heating+, DevPortalEuDataActRead
heating.solar.rechargeSuppression
Shows the status of recharge suppression.
DevPortalHeatingRead, Heating
heating.solar.sensors.temperature.collector
Shows Solar Collector temperature in °C
DevPortalHeatingRead, Heating
heating.solar.sensors.temperature.dhw
Shows solar dhw temperature in °C
Heating+
heating.solar.statistics
Shows statistics of solar operating hours.
DevPortalEuDataActRead
heating.solar.status
Shows the current device status.
DevPortalEuDataActRead
heating.solar.summary.power.production
Shows cumulated statistics of generated heat energy for the space climate heating.
Heat pump
heating.spf.dhw
Shows the SPF for DHW.
Heat pump
heating.spf.heating
Shows the SPF for heating.
Heat pump
heating.spf.total
Shows the SPF of heating and DHW.
DevPortalEuDataActRead
heating.suctionModule.statistics
Shows statistics of suction module operating hours.
DevPortalHeatingRead, Heating, DevPortalEuDataActRead
heating.temperature.commonSupply
Shows the value and unit of common flow temperature setpoint. Also includes the command to change the common flow temperature setpoint
DevPortalEuDataActRead
heating.valves.fourThreeWay.position
Shows the current position of the Four Three Way valve.
DevPortalEuDataActRead
heating.venting.available
Shows a device venting availability.

Photovoltaic

DevPortalEuDataActRead
photovoltaic.installedPeakPower
Shows the total installed power of the photovoltaic system.
DevPortalPhotovoltaicRead, Photovoltaic, DevPortalEuDataActRead
photovoltaic.production.cumulated
Shows the produced energy of the photovoltaic system in different periods.
DevPortalPhotovoltaicRead, Photovoltaic
photovoltaic.production.cumulated.consolidated
Shows the consolidated energy values from photovoltaic panels in cascade.
DevPortalPhotovoltaicRead, Photovoltaic, DevPortalEuDataActRead
photovoltaic.production.current
Shows the power which the photovoltaic panel affords in watt.
DevPortalPhotovoltaicRead, Photovoltaic
photovoltaic.status
Shows the status of photovoltaic system.
DevPortalPhotovoltaicRead, Photovoltaic
photovoltaic.string
Shows information about enabled strings.
DevPortalPhotovoltaicRead, Photovoltaic, DevPortalEuDataActRead
photovoltaic.string.current
Shows the current power of the first, second and the third photovoltaic string in ampere.
DevPortalPhotovoltaicRead, Photovoltaic, DevPortalEuDataActRead
photovoltaic.string.N.electricity
Shows electricity of the photovoltaic strings.
DevPortalPhotovoltaicRead, Photovoltaic, DevPortalEuDataActRead
photovoltaic.string.N.power
Shows current power of the photovoltaic strings.
DevPortalPhotovoltaicRead, Photovoltaic, DevPortalEuDataActRead
photovoltaic.string.N.voltage
Shows voltage of the photovoltaic strings.
DevPortalPhotovoltaicRead, Photovoltaic, DevPortalEuDataActRead
photovoltaic.string.voltage
Shows the voltage value for the first, second and the third photovoltaic string in volt.

Point of common coupling (PCC)

DevPortalEuDataActRead
pcc.ac.active.current
Shows the current active power for each phase and for all together in ampere.
DevPortalEuDataActRead
pcc.ac.active.power
Shows the active power at the common point of coupling.
DevPortalEuDataActRead
pcc.ac.reactive.power
Shows the reactive power at the common point of coupling.
DevPortalEuDataActRead
pcc.state.gridCode
Shows the grid code settings.
Battery, DevPortalEuDataActRead
pcc.transfer.consumption.total
Shows the value of total consumption over the point of coupling.
Battery, DevPortalEuDataActRead
pcc.transfer.feedIn.total
Shows the total feed in of the point of coupling.
Battery, DevPortalEuDataActRead
pcc.transfer.power.exchange
Shows the value power of exchange.

Rooms

DevPortalEuDataActRead
rooms.features.remotePresenceProbability
Shows wether remotePresenceProbability is currently activated for supply channel N.
DevPortalEuDataActRead
rooms.features.supplyChannel0FTDC
Shows the FTDC for supply channel N state. Provides command to it.
DevPortalEuDataActRead
rooms.features.supplyChannel0FTDCUseValveInformation
Shows the FTDC valve information usage for supply channel N. Provides command to it.
DevPortalEuDataActRead
rooms.features.supplyChannel0PumpControl
Shows the Pump Control usage for supply channel N. Provides command to it.
DevPortalEuDataActRead
rooms.N.algorithm
Provides a command to set its configuration.
DevPortalEuDataActRead
rooms.N.childLock
Shows the 'Child-lock' function on the eTRV activation for the room. Provides commands to it.
DevPortalEuDataActRead
rooms.N.co2
Shows the desired CO2 concentration.
DevPortalEuDataActRead
rooms.N.condensationRisk
Shows the condensation risk of the room.
DevPortalEuDataActRead
rooms.N.configuration.heatOnTime
Shows whether heat on time algorithm is active for the room. Provides the command to activate or deactivate it.
DevPortalEuDataActRead
rooms.N.configuration.hydraulicBalancing
Shows whether the automatic hydraulic balancing is turned on or off.
DevPortalEuDataActRead
rooms.N.configuration.openWindow
Shows the 'Open window' function activation for the room. Provides commands to it.
DevPortalEuDataActRead
rooms.N.configuration.trvAlgorithmActive
Shows the TRV algorithm activation for the room. Provide a command to set it.
DevPortalEuDataActRead
rooms.N.configuration.window.openState
Shows the 'Open window' function activation for the room. Provides commands to it.
DevPortalEuDataActRead
rooms.N.operating.programs.comfort
Shows the 'Comfort' operating program activation and its desired temperature for the room. Provides a command to set the temperature.
SRC
rooms.N.operating.programs.comfortCooling
Shows the 'Comfort cooling' operating program activation and its desired temperature for the room. Provides a command to set the temperature.
SRC
rooms.N.operating.programs.comfortHeating
Shows the 'Comfort heating' operating program activation and its desired temperature for the room. Provides a command to set the temperature.
SRC
rooms.N.operating.programs.normalCooling
Shows the 'Normal cooling' operating program activation and its desired temperature for the room. Provides a command to set the temperature.
SRC
rooms.N.operating.programs.normalHeating
Shows information about normal program of the room
SRC
rooms.N.operating.programs.reducedCooling
Shows the 'Reduced cooling' operating program activation and its desired temperature for the room. Provides a command to set the temperature.
SRC
rooms.N.operating.programs.reducedHeating
Shows information about reduced program of the room
SRC
rooms.N.operating.state
Shows information about the current state of the room.
SRC
rooms.N.quickmodes.manual
Shows the 'Manual' quick mode activation and its configuration for the room. Provides commands to it and set the temperature.
SRC
rooms.N.quickmodes.manualTillNextSchedule
Shows information related to manual program. Also provides the commands to enable/disable
SRC
rooms.N.schedule
Shows heating schedule for room N and provides command to set a new one.
SRC
rooms.N.sensors.co2
Shows the sensor status, a weighted average of all measured co2-values in the room. The value is mapped into a level according to the provided legend.
SRC, DevPortalEuDataActRead
rooms.N.sensors.humidity
Shows the weighted average of all humidity sensor values measured in the room.
DevPortalEuDataActRead
rooms.N.sensors.openWindow
Shows the open window detection in the room.
SRC, DevPortalEuDataActRead
rooms.N.sensors.temperature
Shows information about room temperature sensor.
SRC, DevPortalEuDataActRead
rooms.N.sensors.window.openState
Shows the open window detection in the room.
DevPortalEuDataActRead
rooms.N.temperature.levels.comfort.cooling
Shows the calculated comfort level cooling temperature in the room.
DevPortalEuDataActRead
rooms.N.temperature.levels.comfort.heating
Shows the calculated comfort level heating temperature in the room.
DevPortalEuDataActRead
rooms.N.temperature.levels.comfort.perceived
Shows the desired comfort level temperature in the room. Provides a command to set it.
DevPortalEuDataActRead
rooms.N.temperature.levels.cooling
Shows the effective set point temperature for cooling in the room.
DevPortalEuDataActRead
rooms.N.temperature.levels.heating
Shows the effective set point temperature for heating in the room.
DevPortalEuDataActRead
rooms.N.temperature.levels.normal.cooling
Shows the calculated normal level cooling temperature in the room.
DevPortalEuDataActRead
rooms.N.temperature.levels.normal.heating
Shows the calculated normal level heating temperature in the room.
DevPortalEuDataActRead
rooms.N.temperature.levels.normal.perceived
Shows the desired normal level temperature in the room. Provides a command to set it.
DevPortalEuDataActRead
rooms.N.temperature.levels.reduced.cooling
Shows the calculated reduced level cooling temperature in the room.
DevPortalEuDataActRead
rooms.N.temperature.levels.reduced.heating
Shows the calculated reduced level heating temperature in the room.
DevPortalEuDataActRead
rooms.N.temperature.reference
Provides a command to set the reference temperature in the room used to calibrate the algorithms.
SRC
rooms.others
Shows other rooms available for the device.
DevPortalEuDataActRead
rooms.others.N.algorithm
Provides a command to set its configuration.
DevPortalEuDataActRead
rooms.others.N.condensationRisk
Shows the condensation risk of the room.
DevPortalEuDataActRead
rooms.others.N.operating.programs.comfort
Shows the 'Comfort' operating program activation and its desired temperature for the other room. Provides a command to set the temperature.
DevPortalEuDataActRead
rooms.others.N.sensors.humidity
Shows the weighted average of all humidity sensor values measured in the other room.
DevPortalEuDataActRead
rooms.others.N.sensors.temperature
Shows the weighted average of all temperature sensor values measured in the other room.
DevPortalEuDataActRead
rooms.others.N.temperature.levels.comfort.cooling
Shows the calculated comfort level cooling temperature in the other room.
DevPortalEuDataActRead
rooms.others.N.temperature.levels.comfort.heating
Shows the calculated comfort level heating temperature in the other room.
DevPortalEuDataActRead
rooms.others.N.temperature.levels.comfort.perceived
Shows the desired comfort level temperature in the other room. Provides a command to set it.
DevPortalEuDataActRead
rooms.others.N.temperature.levels.cooling
Shows the effective set point temperature for cooling in the other room.
DevPortalEuDataActRead
rooms.others.N.temperature.levels.heating
Shows the effective set point temperature for heating in the other room.
DevPortalEuDataActRead
rooms.others.N.temperature.levels.normal.cooling
Shows the calculated normal level cooling temperature in the other room.
DevPortalEuDataActRead
rooms.others.N.temperature.levels.normal.heating
Shows the calculated normal level heating temperature in the other room.
DevPortalEuDataActRead
rooms.others.N.temperature.levels.normal.perceived
Shows the desired normal level temperature in the other room. Provides a command to set it.
DevPortalEuDataActRead
rooms.others.N.temperature.levels.reduced.cooling
Shows the calculated reduced level cooling temperature in the other room.
DevPortalEuDataActRead
rooms.others.N.temperature.levels.reduced.heating
Shows the calculated reduced level heating temperature in the other room.
DevPortalEuDataActRead
rooms.remotePresenceProbability
Shows the probability that the user (and connected persons) are away from geofencing-perspective.
SRC
rooms.status
Shows information about rooms status

tcu

DevPortalEuDataActRead
tcu.ethernet.N.config
Shows configuration of LAN interface N.
DevPortalEuDataActRead
tcu.features.hems
Shows whether hems is currently activated. Also provides command to de/activate it.
DevPortalEuDataActRead
tcu.features.wirelessRemoteController
Shows the device Wireless Remote Controller connectivity possibility. Provides command to de/-activate it.
DevPortalHeatingRead, Heating
tcu.wifi
Shows information related to the WiFi in a tcu.
DevPortalEuDataActRead
tcu.wifi.accessPoint
Closes the access point of the gateway.

Thermostatic radiator valve (TRV)

DevPortalEuDataActRead
trv.childLock
Shows the eTRV 'Child-lock' function activation.
DevPortalEuDataActRead
trv.mountingMode
Shows the eTRV mounting mode activation.
SRC, DevPortalEuDataActRead
trv.temperature
Shows the target temperature of the eTRV. Provides a command to set it.
DevPortalEuDataActRead
trv.valve.position
Shows the eTRV valve position.

vcs

DevPortalEuDataActRead
vcs.session
Shows the status of the Wallbox Session.
DevPortalEuDataActRead
vcs.session.charging
Shows the charged energy and the duration of the session.

Ventilation

DevPortalEuDataActRead
ventilation.air.balance.offset
Shows the inflow and the output flow of the air in percent. Depends on ventilation.air.balance.volumeFlow whether 10% will be added or subtracted.
DevPortalEuDataActRead
ventilation.airQuality.co
Shows the current calculated value of carbon monoxide and the sensor connection status in the ventilation system.
DevPortalEuDataActRead
ventilation.airQuality.co2
Shows the current calculated value of carbon dioxide and the sensor connection status in the ventilation system.
DevPortalEuDataActRead
ventilation.airQuality.organicComponents
Shows the current calculated value of organic components and the sensor connection status in the ventilation system.
DevPortalEuDataActRead
ventilation.airQuality.pm10
Shows the current calculated value of dust and the sensor connection status in the ventilation system.
DevPortalEuDataActRead
ventilation.airQuality.pm2d5
Shows the current calculated value of fine dust and the sensor connection status in the ventilation system.
DevPortalEuDataActRead
ventilation.airQuality.temperature
Shows the current calculated value of temperature and the sensor connection status in the ventilation system.
DevPortalEuDataActRead
ventilation.bypass
Shows whether the bypass is available or not.
DevPortalEuDataActRead
ventilation.bypass.configuration.temperature.perceived
Shows the perceived temperature for bypass mode. Also provides command to set it.
DevPortalEuDataActRead
ventilation.bypass.configuration.temperature.supply.dynamicRegulation
Shows supply temperature for bypass operating mode automatic automatic regulation. Also provides command to set it.
DevPortalEuDataActRead
ventilation.bypass.configuration.temperature.supply.smoothRegulation
Shows supply temperature for bypass operating mode automatic automatic regulation. Also provides command to set it.
DevPortalHeatingRead, DevPortalEuDataActRead
ventilation.bypass.operating.modes.active
Shows which operating mode is active on the bypass.
DevPortalEuDataActRead
ventilation.bypass.operating.modes.automatic
ventilation.bypass.operating.modes.automatic
DevPortalEuDataActRead
ventilation.bypass.operating.modes.open
Shows whether the bypass operating mode open is active or not.
DevPortalEuDataActRead
ventilation.bypass.position
Shows the position of the bypass in percent.
DevPortalEuDataActRead
ventilation.control.filterChange
Control filter Change.
DevPortalEuDataActRead
ventilation.external.lock
Shows whether the external lock for the ventilation system is active or not.
DevPortalEuDataActRead
ventilation.fan.assignmentSwitch
Shows if the fan assignment switch is active.
DevPortalEuDataActRead
ventilation.fan.exhaust
Shows the current and target fan RPM of exhaust ventilation.
DevPortalEuDataActRead
ventilation.fan.exhaust.runtime
Shows the runtime of the exhaust fan in the ventilation system in the ventilation system.
DevPortalEuDataActRead
ventilation.fan.supply
Shows the current and target fan RPM of supply ventilation.
DevPortalEuDataActRead
ventilation.fan.supply.runtime
Shows the runtime of the supply fan.
DevPortalEuDataActRead
ventilation.features.co
Shows whether the CO is currently activated
DevPortalEuDataActRead
ventilation.features.co2
Shows whether the CO2 is currently activated
DevPortalEuDataActRead
ventilation.features.dust
Shows whether the Dust is currently activated
DevPortalEuDataActRead
ventilation.features.finedust
Shows whether the FineDust is currently activated
DevPortalEuDataActRead
ventilation.features.organicComponent
Shows whether the OrganicComponent is currently activated
DevPortalEuDataActRead
ventilation.filter.information
Shows the filter-related information.
DevPortalEuDataActRead
ventilation.filter.pollution.blocked
Shows the percentage blocked of the pollution filter
DevPortalEuDataActRead
ventilation.filter.runtime
Shows how much hours the ventilation system worked with this filter.
DevPortalEuDataActRead
ventilation.heatExchanger.frostprotection
Shows whether the frostprotection for the heat exchanger is active or not.
DevPortalEuDataActRead
ventilation.heatExchanger.frostprotection.operating.modes.disbalance
Shows if the "Disbalance" frost protection operating mode is active for the device.
DevPortalEuDataActRead
ventilation.heatExchanger.frostprotection.operating.modes.intermittent
Shows if the "Intermittent" frost protection operating mode is active for the device.
DevPortalEuDataActRead
ventilation.heatExchanger.frostprotection.operating.modes.preheater
Shows if the "Preheater" frost protection operating mode is active for the device.
DevPortalEuDataActRead
ventilation.heatExchanger.frostprotection.operating.modes.preheatereco
Shows if the "Preheater Eco Mode" frost protection operating mode is active and its limits for the device.
DevPortalEuDataActRead
ventilation.heating.recovery
Shows the heat recovery in percent.
DevPortalHeatingRead, Heating
ventilation.levels.levelFour
Shows whether ventilation operating program is active with maximal air volume flow.
DevPortalHeatingRead, Heating
ventilation.levels.levelOne
Shows whether ventilation operating program is active with minimum air flow.
DevPortalHeatingRead, Heating
ventilation.levels.levelThree
Shows whether ventilation operating program is active with standard air volume flow.
DevPortalHeatingRead, Heating
ventilation.levels.levelTwo
Shows whether ventilation operating program is active with reduced air volume flow.
DevPortalEuDataActRead
ventilation.lockExternal
Shows ventilation external lock function settings.
DevPortalHeatingRead, Heating
ventilation.operating.modes.active
Shows current active operating mode enabled on the device.
DevPortalHeatingRead, Heating, DevPortalEuDataActRead
ventilation.operating.modes.filterChange
Shows whether the filter change mode is active or not.
DevPortalHeatingRead, Heating
ventilation.operating.modes.permanent
Shows whether the ventilation operating mode permanent is active or not.
DevPortalHeatingRead, Heating
ventilation.operating.modes.sensorDriven
Shows whether the ventilation operating mode driven by sensors is active or not.
DevPortalHeatingRead, Heating
ventilation.operating.modes.sensorOverride
Shows whether the ventilation operating mode sensorOverride is active or not and the current behavior.
DevPortalHeatingRead, Heating
ventilation.operating.modes.standard
Shows whether Standard operating mode is active with minimum air flow.
DevPortalHeatingRead, Heating
ventilation.operating.modes.standby
Shows whether Standby operating mode is active.
DevPortalHeatingRead, Heating
ventilation.operating.modes.ventilation
Shows whether Ventilation operating mode is active.
DevPortalHeatingRead, Heating
ventilation.operating.programs.active
Shows current active operating program enabled on the device.
DevPortalHeatingRead, Heating
ventilation.operating.state
Shows information about the current state of the ventilation.
DevPortalEuDataActRead
ventilation.preHeater
Shows the electrical pre-heater activation in the ventilation system.
DevPortalEuDataActRead
ventilation.preHeater.power.consumption
Shows cumulated statistics of the preheater energy consumption in the ventilation system.
DevPortalEuDataActRead
ventilation.preHeater.power.consumption.current
shows the current approximate power consumption of the electrical pre heate
DevPortalEuDataActRead
ventilation.preHeater.statistics
Show the statistics of the Heater.
DevPortalHeatingRead, Heating
ventilation.quickmodes.comfort
Shows if comfort quickmodes of ventilation is active. Also provides the commands to activate/deactivate it.
DevPortalHeatingRead, Heating
ventilation.quickmodes.eco
Shows if eco quickmodes of ventilation is active. Also provides the commands to activate/deactivate it.
DevPortalHeatingRead, Heating
ventilation.quickmodes.forcedLevelFour
Shows whether ventilation operating program is active with maximum air flow.
DevPortalHeatingRead, Heating
ventilation.quickmodes.holiday
Shows if holiday quickmodes of ventilation is active. Also provides the commands to changeEndDate or schedule it.
DevPortalHeatingRead, Heating
ventilation.quickmodes.silent
Shows whether the silent quick mode is active and how long it is still active.
DevPortalHeatingRead, Heating
ventilation.quickmodes.standby
Shows if quickmode standby for ventilation is active. Also provides the commands to activate/deactivate it.
DevPortalHeatingRead, Heating
ventilation.quickmodes.temporaryShutdown
ventilation.quickmodes.temporaryShutdown
DevPortalHeatingRead, Heating
ventilation.schedule
Shows schedule of ventilation and provides command to set a new one.
DevPortalEuDataActRead
ventilation.sensors.actuator.selftest
Shows sensors actuator self-test activation and status.
DevPortalEuDataActRead
ventilation.sensors.airBorneDust.pm1
Shows the status and value of the sensor.
DevPortalEuDataActRead
ventilation.sensors.airBorneDust.pm10
Shows information related to Ventilation exhaust temperature sensor.
DevPortalEuDataActRead
ventilation.sensors.airBorneDust.pm2d5
Shows the status and value of the sensor.
DevPortalEuDataActRead
ventilation.sensors.airBorneDust.pm4
Shows the status and value of the sensor.
DevPortalEuDataActRead
ventilation.sensors.airQuality
Shows the air quality and the status of the air quality sensor.
DevPortalEuDataActRead
ventilation.sensors.humidity.exhaust
shows the sensor value for exhaust humidity and its status
DevPortalEuDataActRead
ventilation.sensors.humidity.extract
shows the sensor value for extract humidity and its status
DevPortalEuDataActRead
ventilation.sensors.humidity.outdoor
shows the sensor value for outdoor humidity and its status
DevPortalEuDataActRead
ventilation.sensors.humidity.supply
shows the sensor value for supply humidity and its status
DevPortalEuDataActRead
ventilation.sensors.temperature.exhaust
Shows information related to Ventilation exhaust temperature sensor.
DevPortalEuDataActRead
ventilation.sensors.temperature.extract
Shows information related to Ventilation extract temperature sensor.
DevPortalEuDataActRead
ventilation.sensors.temperature.outside
Shows the outside temperature value in the ventilation system.
DevPortalEuDataActRead
ventilation.sensors.temperature.supply
Shows the supplied temperature value in the ventilation system.
DevPortalEuDataActRead
ventilation.sensors.volatileOrganicCompounds
Shows the status and value of the sensor.
DevPortalEuDataActRead
ventilation.switchActivation
Shows external switch activation for quick selection.
DevPortalEuDataActRead
ventilation.volumeFlow.current.input
Shows the input air volume flow.
DevPortalEuDataActRead
ventilation.volumeFlow.current.output
Shows the output air volume flow.

water

DevPortalEuDataActRead
water.consumption.flow.current
Shows the current flow of water
DevPortalEuDataActRead
water.consumption.flow.max
Shows the maximum recorded flow of water
DevPortalEuDataActRead
water.consumption.summary
Shows cumulated statistics of consumed water
DevPortalEuDataActRead
water.leakDetection.configuration.flowAlert
The current flow of consumed water.
DevPortalEuDataActRead
water.leakDetection.sensors.leakage.N.battery
Shows the battery level in percent.
DevPortalEuDataActRead
water.leakDetection.sensors.leakage.N.id
Shows the sensor's MAC address.
DevPortalEuDataActRead
water.leakDetection.sensors.leakage.N.name
Shows the name of the sensor and allows to change it.
DevPortalEuDataActRead
water.leakDetection.sensors.leakage.N.rssi
Shows the Received signal strength indication.
DevPortalEuDataActRead
water.leakDetection.sensors.leakage.N.version.hardware
Shows the hardware-version of the sensor.
DevPortalEuDataActRead
water.leakDetection.sensors.leakage.N.version.software
Shows the software-version of the sensor.
DevPortalEuDataActRead
water.softener.configuration.lowSaltAlert
Allows setting the minimum days of salt stock. If the stock does not last for this number of days, an alert will be raised.
DevPortalEuDataActRead
water.softener.salt.level.days
Shows for how many days the salt in stock will last.
DevPortalEuDataActRead
water.valves.shutoff.holiday
Shows weather the holiday-program is currently active.
DevPortalEuDataActRead
water.valves.shutoff.motor
Shows the current state of the shutoff-valve's motor.
DevPortalEuDataActRead
water.valves.shutoff.position
Shows the current position of the shutoff-valve.

tet · 5 Lokakuu 2025

-Teme- sanoi:
mm. taajuustietoa ei tule HAN portista

Mihin sinä taajuustietoa tarvitset? Keppihevoseksi sille, että voit sanoa, ettei HAN-portti täytä direktiivin vaatimusta *kaiken* kerätyn datan jakamiseen?

-Teme- · 5 Lokakuu 2025

tet sanoi:
Mihin sinä taajuustietoa tarvitset? Keppihevoseksi sille, että voit sanoa, ettei HAN-portti täytä direktiivin vaatimusta *kaiken* kerätyn datan jakamiseen?

Vaikka siihen ja se olisi myös loistavaa kun HAN portista tulisi aktiivisesti kaikki data, niin pystyisi käyttämään reservimarkkinaohjaukseen suoraan HAN dataa ilman erillistä mittausta.
Se avaisi ovia myös moneen businekseen taajusmarkkinoilla plug’n’play tyylisellä laitteistolla.
Mielestäni se on kaikkien etu kun data on avointa ja helposti kaikkien saatavilla, kuten esimerkiksi tässä tapauksessa EU säädös sen määrää

tet · 5 Lokakuu 2025

-Teme- sanoi:
Vaikka siihen ja se olisi myös loistavaa kun HAN portista tulisi aktiivisesti kaikki data, niin pystyisi käyttämään reservimarkkinaohjaukseen suoraan HAN dataa ilman erillistä mittausta.

No jos joku toimija tarjoaa palvelua, joka mahdollistaa kotitalouksien (kollektiivisen) osallistumisen FCR-reserveihin, se varmasti myös tuo taloon laitteiston jolla siihen osallistutaan. Siinä laitteistossa varmasti on se taajuusmittaus sitten jo itsessään.

-Teme- · 5 Lokakuu 2025

Toinen skanario on palvelu vrt älyenergia appi, jossa annetaan valtuutus ja suoraan verkkoyhtiön palvelusta haetaan APi yli kulutustiedot 15min intervallilla, ilman että pitää odottaa päiviä niiden ilmestymiseen datahubiin.

Myös kaukoverkon laitteista varmaan kerätään käyttödataa, ovatkohan ne avoimia?

@tet jotenkin aistin vastaisuutta datan täydelliseen avaamiseen?

-Teme- · 5 Lokakuu 2025

tet sanoi:
No jos joku toimija tarjoaa palvelua, joka mahdollistaa kotitalouksien (kollektiivisen) osallistumisen FCR-reserveihin, se varmasti myös tuo taloon laitteiston jolla siihen osallistutaan. Siinä laitteistossa varmasti on se taajuusmittaus sitten jo itsessään.

Ei muuten välttämättä tarvitse tuoda laitteita. Alas säätöön voidaan käyttää kiinteistön kulutuskohteita jolloin LVV ohjaus riittää kun verkosta saadaan taajuustieto

tet · 5 Lokakuu 2025

-Teme- sanoi:
Toinen skanario on palvelu vrt älyenergia appi, jossa annetaan valtuutus ja suoraan verkkoyhtiön palvelusta haetaan APi yli kulutustiedot 15min intervallilla, ilman että pitää odottaa päiviä niiden ilmestymiseen datahubiin.

Myös kaukoverkon laitteista varmaan kerätään käyttödataa, ovatkohan ne avoimia?

@tet jotenkin aistin vastaisuutta datan täydelliseen avaamiseen?

En vastusta datan avaamista, ihmettelen vain sitä miksi taajuustiedon puuttuminen olisi millään lailla merkityksellistä. Se ei kerro mitään mittarin takan olevasta kulutuskohteesta, vaan mittarin edessä olevasta verkosta. Eikö tässä uudessa määräyksessä ollut kyse nimenomaan kuluttajan datasta? Kuluttaja ei "omista" taajuutta, se on verkon suure, ei kuluttajan talouden kuten muut mitattavat tiedot.

-Teme- · 5 Lokakuu 2025

tet sanoi:
En vastusta datan avaamista, ihmettelen vain sitä miksi taajuustiedon puuttuminen olisi millään lailla merkityksellistä. Se ei kerro mitään mittarin takan olevasta kulutuskohteesta, vaan mittarin edessä olevasta verkosta. Eikö tässä uudessa määräyksessä ollut kyse nimenomaan kuluttajan datasta? Kuluttaja ei "omista" taajuutta, se on verkon suure, ei kuluttajan talouden kuten muut mitattavat tiedot.

Olet oikeassa, linjajännite menee samaan kategoriaan mutta se kuitenni on mukana

tet · 5 Lokakuu 2025

-Teme- sanoi:
Olet oikeassa, linjajännite menee samaan kategoriaan mutta se kuitenni on mukana

No jännite voi sentään vielä vaihdella kotitaloudenkin kuormanvaihtelun mukana, toki paikasta riippuen. Taajuuteen sen sijaan on turha yrittää edes 35 A sulakkeiden takaa vaikuttaa.

pahapaha · 6 Lokakuu 2025

Carunan vastaus. Harkinnassa Traficomille kantelun tekeminen:

Hei,

kiitos viestistänne ja tarkemmista perusteluistanne, joihin olemme tutustuneet huolella.

Kuten esitimme 23.9.2025 päivätyssä viestissä, EU:n datasäädöksen (2023/2854) datanjakamisvelvoite ei koske Carunan omistaman sähkömittarin tuottamaa dataa. Asiakas ei ole datasäädöksen tarkoittama käyttäjä. Perustelemme tätä tarkemmin alla.

Käyttäjällä tarkoitetaan datasäädöksen 2(12) artiklan mukaan "oikeushenkilöä tai luonnollista henkilöä, joka omistaa verkkoon liitetyn tuotteen tai jolle kyseisen verkkoon liitetyn tuotteen tilapäinen käyttöoikeus on sopimuksella siirretty taikka joka vastaanottaa tuotteeseen liittyviä palveluja".

Asiakaslaskutuksessa käytettävän sähkömittarin omistaa Caruna, joka myös kantaa siitä huolto- ja vaihtovastuun lainsäädännön ja laitteen teknisten vaatimusten mukaisesti. Vaikka sähkömittari sijaitsee asiakkaan tiloissa tai sen läheisissä tiloissa, sen omistusoikeus säilyy Carunalla ja sitä käytetään verkkoyhtiön lainsäädännöllisiin velvoitteisiin järjestää sähkönkäyttöpaikan sähköntoimitusten mittaus sekä mittaustietojen rekisteröinti ja ilmoittaminen sähkömarkkinoiden osapuolille. Asiakkaalle ei siis synny sellaista datasäädöksen tarkoittamaa omistusoikeutta tai vuokraus- tai leasingsopimukseen rinnastuvaa sopimusperusteista oikeutta, jonka kautta asiakkaalle syntyisi datasäädöksessä tarkoitettu käyttäjän rooli suhteessa sähkömittariin.

Olette maininneet, että käyttäjän rooli voi myös syntyä tuotteeseen liittyvän palvelun perusteella. Datasäädöksen 2(12) artiklan mukaisessa käyttäjän määritelmässä viitataan "tuotteeseen liittyvien palvelujen" käsitteeseen, jolla datasäädöksen 2(6) artiklan mukaan tarkoitetaan "muuta digitaalista palvelua kuin sähköistä viestintäpalvelua, mukaan lukien ohjelmistot, jotka on osto-, vuokraus- tai liisaushetkellä liitetty tuotteeseen siten, että verkkoon liitetty tuote ei pystyisi ilman sitä suorittamaan jotain sen toiminnoista, tai jotka valmistaja tai kolmas osapuoli myöhemmin liittää tuotteeseen lisätäkseen, päivittääkseen tai mukauttaakseen verkkoon liitetyn tuotteen toimintoja".

Tuotteeseen liittyvän palvelun käsitteellä viitataan siis nimenomaan digitaaliseen palveluun. EU:n komissio on täsmentänyt edelleen, että jotta digitaalista palvelua voidaan pitää datasäädöksessä tarkoitettuna tuotteeseen liittyvänä palveluna, kahden perusedellytyksen on täytyttävä: i) verkkoon kytketyn tuotteen ja palveluntarjoajan välillä on oltava kaksisuuntainen tiedonvaihto; ja ii) palvelun on vaikutettava verkkoon kytketyn tuotteen toimintoihin, käyttäytymiseen tai toimintaan. (Komission Data Act FAQ, version 1.3).

Komissio on edelleen täsmentänyt, että tilanteessa, jossa asiakas käyttää yhdistettyä tuotetta osana muuta palvelusopimusta, joka ei siirrä itse tuotteeseen liittyviä omistusoikeuksia, yhdistettyä tuotetta käyttävä henkilö ei ole datasäädöksen mukainen käyttäjä.

Sähköverkkopalvelun ostaminen ei ole datasäädöksessä tarkoitettu digitaalinen palvelu, joka synnyttäisi teille asiakkaana datasäädöksen mukaisen käyttäjän roolin suhteessa sähkömittariin. Myöskään verkkopalvelu, jossa esitetään sähkömittarin välittämää tietoa, ei siis täytä datasäädöksen mukaista tuotteeseen liitetyn palvelun määritelmää.

Näin ollen teille ei asiakkaana synny datasäädöksessä tarkoitettua "käyttäjän" roolia suhteessa sähkömittariin.

Huomaattehan, että vaikka datasäädöksen datanjakamisvelvoite ei koske Carunan omistaman sähkömittarin dataa, teillä on mahdollisuus tutustua kulutuksesta syntyviin tietoihin niin Caruna Plussan Sähkönseurannassa kuin sähkömarkkinalain perusteella luodussa Fingridin datahubissa.

Tulevaisuudessa Carunan sähköverkon alueen kiinteistöihin asennetaan kotiautomaatioliitäntäportilla varustettu sähkömittari, jonka avulla voitte ottaa käyttöön oman päätelaitteenne reaaliaikaiseen sähkömittarin tietojen lukemiseen. Halutessanne voitte tilata sähkömittarin vaihdon jo ennakkoon, tällöin veloitamme mittarinvaihdosta palvelumaksuhinnaston mukaisen maksun. Lisätietoja saatte osoitteesta https://caruna.fi/tuotteet-ja-palvelut/kotiin-ja-kiinteistoon/sahkomittari, kohdasta Sähkömittarin kotiautomaatioliitäntä.

Ystävällisin terveisin,

Kalle

-Teme- · 6 Lokakuu 2025

Ihmettelen että Datasäädöksen esimerkeissä on mainittu auton vuokraus ja ajoneuvon vuokraajalla on oikeus auton tuottamaan dataan vuokrauksen ajalta. Siinä omistus, liisaus tms kohteeseen on huomattavan paljon kevyempi kuin kiinteistön energiamittari josta verkkoyhtiö kerää käyttäjän toimista dataa.
Itse en vielä ole saanut uutta vastausta Carunalta, mutta hyvä alkaa valmistelemaan kantelua Traficomille

pahapaha · 6 Lokakuu 2025

Ja äsken lähti kantelu Traficomille:

Kantelu Caruna Oy:tä koskien – EU:n datasäädös ja pääsy sähkömittarin dataan

Vastaanottaja: Liikenne- ja viestintävirasto Traficom

Arvoisa vastaanottaja,

En löytänyt tälle asialle sähköistä kantelukanavaa, joten toimitan kantelun Caruna Oy:n menettelystä sähköpostitse. Pyydän teitä kuittaamaan tämän viestin vastaanotetuksi ja vahvistamaan asian käsittelyyn ottamisen tai vaihtoehtoisesti ohjaamaan minut oikean menettelytavan pariin.

1. Kantelija
xx xx

2. Kantelun kohde

Caruna Oy:n kieltäytyminen myöntämästä minulle EU:n datasäädöksen (2023/2845) mukaista oikeutta päästä käsiksi käyttöpaikkani sähkömittarin tuottamaan reaaliaikaiseen dataan.

3. Asian kuvaus ja perustelut

Olen pyytänyt Carunalta pääsyä sähkömittarini dataan datasäädökseen vedoten. Caruna on toistuvasti kieltäytynyt tästä ja esittänyt yksityiskohtaiset, mutta nähdäkseni virheelliset, juridiset perustelut kannalleen (ks. liitteet).

Katson, että Carunan linjaus on tarkoitushakuinen yritys kiertää datasäädöksen velvoitteita ja pelata aikaa yhtiön omaan, myöhempään aikatauluun sopivalle mittarinvaihdolle. Tämä tapahtuu siitä huolimatta, että lainsäädäntöön on ollut aikaa valmistautua.

Carunan tulkinta on virheellinen seuraavista syistä:

Argumentti 1: En ole "käyttäjä", koska en omista mittaria.

Tämä sivuuttaa täysin sen, että olen palvelun vastaanottaja. Koko sähköverkkopalvelu, josta maksan siirtomaksua, perustuu mittarin tuottamaan dataan. On kestämätöntä väittää, etten olisi datasäädöksen tarkoittama käyttäjä suhteessa laitteeseen, joka mittaa minulle toimitettua ja minun maksamaani palvelua.

Argumentti 2: Sähköverkkopalvelu ei ole "tuotteeseen liittyvä digitaalinen palvelu".

Tämä väite on absurdi. Moderni sähköverkkopalvelu perustuu etäluettaviin, digitaalisiin älymittareihin, jatkuvaan tiedonsiirtoon ja kansalliseen digitaaliseen Datahub-järjestelmään. Caruna yrittää keinotekoisesti erottaa fyysisen sähkönsiirron siitä digitaalisesta ekosysteemistä, joka mahdollistaa sen toiminnan.

Argumentti 3: Komission FAQ-tulkinta.

Caruna vetoaa tulkintaan, jonka mukaan palvelun on vaikutettava tuotteen toimintoihin. Sähkömittarin ja verkkopalvelun suhde on täysin symbioottinen: ilman sähköä laite ei mittaa mitään, ja ilman mittaria palvelua ei voi laskuttaa. On ilmeistä, että vahvasti säännellyn kriittisen infrastruktuurin, kuten sähköverkon, kohdalla tulkinnan on oltava laajempi kuin esimerkiksi erillisten kuluttajatuotteiden, vaikkapa älyjääkaapin, kohdalla.

4. Pyyntö Traficomille

Edellä mainitun perusteella pyydän Traficomia antamaan asiassa sitovan ratkaisun ja ottamaan kantaa seuraaviin kysymyksiin:

Onko sähköverkkoyhtiön asiakas datasäädöksen tarkoittama "käyttäjä" suhteessa etäluettavaan sähkömittariin, vaikka asiakas ei omista laitetta?
Katsotaanko sähköverkkopalvelu datasäädöksen tarkoittamaksi "tuotteeseen liittyväksi palveluksi"?

Lisäksi katson, että Carunan tarjoama maksullinen mittarinvaihto asettaa kuluttajat eriarvoiseen asemaan ja tekee lakisääteisestä oikeudesta kaupallisen tuotteen.

Carunan tulkinta johtaa kestämättömään lopputulokseen, jossa EU:n datasäädös ei soveltuisi sähkönsiirtoon – yhteen yleisimmistä ja taloudellisesti merkittävimmistä palveluista, joita kuluttajat käyttävät. On lain hengen vastaista, että säädös, jonka tavoite on antaa kuluttajille valta omaan dataansa, jättäisi ulkopuolelle juuri sen datan, jolla kuluttaja voisi reaaliaikaisesti hallita yhtä kotitaloutensa suurimmista menoeristä ja tehdä tietoon perustuvia säästöpäätöksiä.

Liitteet:
Carunan vastaus pyyntööni saada sähkömittarin reaaliaikainen data käyttööni 23.9.2025 .pdf
Vastineeni 23.9.2025 Carunan vastaukseen osa 1.pdf
Täydennys vastineeni 23.9.2025 Carunan vastaukseen osa 2.pdf
Carunan vastaus 6.10.2025.pdf

Ystävällisin terveisin
Veikko Valittaja

jalih · 6 Lokakuu 2025

Kantelu on on todennäköisesti turha. Verkkoyhtiöille on sähkömittarien vaihtoon Suomessa annettu aikaa 4.7.2031 asti. Tästä siis on todennäköisesti myönnetty poikkeama.

-Teme- · 6 Lokakuu 2025

Mittarivaihto on mahdollisuus vaikuttaa että EU säädös saadaan toteutettua. Mittareiden HAN portti ei tarvitse suomen lain mukaan olla käytössä kuin vasta 1.1.2026, jolloin Data Actin toteutus pitää olla toteutettavissa myös ennen sitä.
Jos asiakkaat eivät olisi käyttäjiä, niin mittareihin ei generoituisi energian käytöstä generoitunutta kulutusdataa.
Lisäksi mittari on selkeästi yksilöity sopimuksessa osaksi käyttäjän käyttöpaikkaa.
Caruna väitti vastineessaan:

"Asiakkaalle ei siis synny sellaista datasäädöksen tarkoittamaa omistusoikeutta tai vuokraus- tai leasingsopimukseen rinnastuvaa sopimusperusteista oikeutta, jonka kautta asiakkaalle syntyisi datasäädöksessä tarkoitettu käyttäjän rooli suhteessa sähkömittariin."

Tämä väite on väärin. Sopimukset osoittavat:

Asiakkaalla ON sopimusperusteinen oikeus käyttää mittaria osana verkkopalvelua
Mittari on yksilöity sopimuksissa - se ei ole anonyymi infrastruktuurikomponentti
Sopimukset ovat pitkäaikaisia ja vakaita (Sähkön verkkosopimus ja Sähkön liittymissopimus)
Sopimukset luovat oikeudellisen yhteyden asiakkaan ja mittarin välille

Data Actin käyttäjämääritelmä täyttyy

Data Actin 2(12) artiklan mukaan "user" on "luonnollinen henkilö, joka omistaa verkkoon liitetyn tuotteen tai jolle kyseisen verkkoon liitetyn tuotteen tilapäinen käyttöoikeus on sopimuksella siirretty"
Näiden sopimusten perusteella:

"Tilapäinen käyttöoikeus" - Sopimus on voimassa toistaiseksi, mutta ei pysyvä omistus → tilapäinen

"Sopimuksella siirretty" - Kaksi erillistä sopimusta Carunan kanssa

"Verkkoon liitetty tuote" - Mittari on yksilöity sopimuksissa numerolla

Asiakkaalla ON Data Actin 2(12) artiklan mukainen "käyttäjä"-asema, koska:

Sähkömittari on "connected product"
Asiakkaalla on "tilapäinen käyttöoikeus sopimuksella siirretty":
- Kaksi erillistä sopimusta
- Mittari yksilöity sopimuksissa
- vuosia voimassa ollut käyttösopimus
- Voimassa toistaiseksi
"Vakaa oikeus" -kriteeri täyttyy
"Riskit ja edut" -kriteeri täyttyy

Carunan vastine on ristiriidassa tosiasioiden kanssa:

Caruna väitti: "Asiakkaalle ei synny sopimusperusteista oikeutta"
Todellisuus: Asiakkaalla on KAKSI erillistä sopimusta, joissa mittari on yksilöity

Sopimusten olemassaolo tekee Carunan argumentista oikeudellisesti kestämättömän. Asiakkaalla on selvästi "tilapäinen käyttöoikeus sopimuksella siirretty" mittariin.

Analysointiin käytetty AI:ta

pahapaha · 7 Lokakuu 2025

jalih sanoi:
Kantelu on on todennäköisesti turha. Verkkoyhtiöille on sähkömittarien vaihtoon Suomessa annettu aikaa 4.7.2031 asti. Tästä siis on todennäköisesti myönnetty poikkeama.

Hmm... Ilmeisesti Caruna ei tiedä tuota koska eivät siihen vetoa? Jos näin olisi, niin siihenhän minä vetoaisin ensimmäisenä kuluttajalle.

janti · 11 Lokakuu 2025

TCL:n ilmoitus jaettavasta datasta ILPejä koskien

EU DATA ACT User Information on Air Conditioner | TCL Europe

This document outlines the types of data our product can generate through its integrated services and features, how we use and share that data, and the rights you have in relation to the data.

www.tcl.com

-Teme- · 11 Lokakuu 2025

VAG data act suomeksi ja linkki portaaliin josta saa oman käytössä olevan auton datat.
Historia datapointeja on listattu 571 A4 arkillista ja live dataa 127 A4 arkkia, tänä että data pointit PDF file jakeluna eikä missään fiksummassa csv tms

EU Data Act | Volkswagen Suomi

www.volkswagen.fi

Edit:
Ei staana, oikeasti
Portaalista kirjautumalla erikseen ladattava zip file - missä API rajapinta? VAG ojentaa keskarin asiakkailleen
Missä se live data mukamas on?

tet · 12 Lokakuu 2025

-Teme- sanoi:
Ei staana, oikeasti
Portaalista kirjautumalla erikseen ladattava zip file - missä API rajapinta? VAG ojentaa keskarin asiakkailleen
Missä se live data mukamas on?

Saattaapi olla tullut hieman yllätyksenä valmistajille tämä määräys. Ehkä se API sieltä joskus tulee, zippi on vain hätäratkaisu?

-Teme- · 14 Lokakuu 2025

Tämä poimittu Facebookista

Varaudumme Data Act-säädökseen seuraamalla kansallisen lainsäädännön etenemistä, jossa tarkat vastuut ja velvollisuudet mittausdatan osalta tullaan määrittelemään tarkemmin. EU:n Data Act antaa raamit, joiden perusteella jäsenvaltioiden tulee valvoa säädöksen toteutumista. Suomessa lainsäädäntö on vielä kesken, joten emme koita ennakoida tulevaa kehitystä ennen kuin on tiedossa mitä tarkalleen vaaditaan.
Käytäthän yhteydenoton seurantatunnusta, mikäli vastaat tähän sähköpostiin.
Ystävällisin terveisin
Mittauspalvelut
Lappeenrannan Energia Oy

-Teme- · 14 Lokakuu 2025

-Teme- sanoi:
VAG data act suomeksi ja linkki portaaliin josta saa oman käytössä olevan auton datat.
Historia datapointeja on listattu 571 A4 arkillista ja live dataa 127 A4 arkkia, tänä että data pointit PDF file jakeluna eikä missään fiksummassa csv tms

EU Data Act | Volkswagen Suomi

www.volkswagen.fi

Edit:
Ei staana, oikeasti
Portaalista kirjautumalla erikseen ladattava zip file - missä API rajapinta? VAG ojentaa keskarin asiakkailleen
Missä se live data mukamas on?
katso liitettä 109158

tämä site lopettanut toimintansa

xismo · 23 Lokakuu 2025

Selvittelin miten mersuista saa dataa ladattua tietokoneelle. Lyhyt vastaus : Ei mitenkään(järkevästi).
Pitkä vastaus : Pitää kyttää Mecedes app:ia puhelimessa( android tai iphone, ei muita) , ladata se sieltä muutaman painalluksen kautta zippinä.
Ja sitten käsin siirtää se tietokoneelle.

Eli ei mitenkään ole automatisoitavissa järjellisellä työllä.
Maksamalla pienen summan kuukausittain pääsisi netin kautta noihin käsiksi kun on oma firma eu:n alueella. Samalla siitä saisi aikaiseksi tuotteen jolla voisi sitten rahastaa muita mutta tuntuu aika oudolle että omasta datasta pitäisi maksaa.

Sotii hiukan EU:n "open data" ppykälää vastaan.

Pitäköön tunkkinsa, helpommin saan tehtyä can väylään snifferin joka sitten puhelimen tms kautta forwardoi tarvittavat tiedot kotikoneelle.
Ehkä sitten eläkkeellä ehdin tuon tekemään ( tarve tosin postuu silloin kun ajot onkin epämääräisin aikoihin).

haraldh · 24 Lokakuu 2025

Kantelinpa minäkin kantelun ilosta.

-Teme- · 31 Lokakuu 2025

Facebookista poimin aiheesta postauksen.
Hämmentävä vastaus Traficomilta, ihan kuin olisivat itse datasäädöksestä pihalla?
Onko kukaan Carunalta kantelun tehneistä saanut mitään vastausta Traficomilta asian liittyen?

Kysyin Traficomilta, miten pitää menetellä jos laitevalmistaja rikkoo EU Data Actin määräyksiä:

"Miten kansalaisen tulee toimia jos hän epäilee, että laitevalmistaja ei noudata Data Actin määräyksiä?
A. Siirtymäaikana
B. Siirtymäajan jälkeen.
Onko menettelyssä eroa jos kyseessä on suomalainen, EU-maalainen vai EU:n ulkopuolinen yritys?

Kansallisen lain ollessa parhaillaan eduskunnan käsiteltävänä Traficomilla ei ole toistaiseksi toimivaltaa tehdä data-asetusta koskevia päätöksiä. Voimme kuitenkin antaa ohjausta ja neuvontaa. Valitusasioiden osalta pyrimme sekä ennen kansallisen lain voimaantuloa, että myös sen jälkeen, ensisijaisesti ohjauksella ja neuvonnalla siihen, että toimijat noudattaisivat asetusta.

Mikäli yhteisymmärrykseen ei päästä ohjauksen ja neuvonnan keinoin, voimme jättää valitusasian odottamaan kansallisen lain voimaantuloa ja mikäli asia on lain voimaantulon jälkeen edelleen relevantti, voimme ottaa asian käsittelyyn ja antaa valituskelpoisen päätöksen.

Data-asetuksen 38 artiklan mukaan luonnollisilla henkilöillä ja oikeushenkilöillä on oikeus tehdä valitus sen jäsenvaltion toimivaltaiselle viranomaiselle, jossa heidän vakinainen asuinpaikkansa tai työpaikkansa taikka sijoittautumispaikkansa sijaitsee. Näin ollen Suomessa asuvat ja työskentelevät henkilöt sekä Suomeen sijoittautuneet yritykset voivat tehdä valituksen Traficomille ja Kilpailu- ja kuluttajavirastolle. Jos valituksen kohteena on muu kuin suomalainen yritys, voi valituksen tehdä Traficomille, joka datakoordinaattorina siirtää valituksen käsiteltäväksi sen maan kansalliselle viranomaiselle, jossa valituksen kohteena olevan yrityksen päätoimipaikka sijaitsee tai EU:n ulkopuolisen yrityksen kyseessä ollessa, siihen maahan, jossa yrityksellä on laillinen edustaja EU:ssa. Suomalaisia yrityksiä koskevat valitukset käsittelee asiasta riippuen joko Traficom tai Kilpailu- ja kuluttajavirasto. Henkilötietojen suojaa koskevissa kysymyksissä toimivaltainen viranomainen on Tietosuojavaltuutettu."

Tuo on kuin jokin geneerinen vastaus ilman aiheeseen liittyvää kantaa. Siirtymäaika on ohi datasäädöksen tiedonkeruun osalta, mutta voimassa uusien laitteiden rajapinnan osalta

haraldh · 31 Lokakuu 2025

Miksi minulla on sellainen käsitys että EU-asetus astuu voimaan heti velvoittavana eikä vaadi kansallista lainsäädäntöä?

EU-lainsäädännön tyypit

Lainsäädäntöprosessi

commission.europa.eu

Asetukset ovat säädöksiä, jotka ovat kaikilta osin sitovia. Niitä sovelletaan suoraan ja yhtäläisesti kaikissa EU-maissa heti niiden tultua voimaan. Niitä ei tarvitse erikseen saattaa osaksi kansallista lainsäädäntöä.

Onko Data Act nyt sitten säädös vai asetus? IANAL

-Teme- · 31 Lokakuu 2025

Kyseessä on asetus ainakin Copilotin mukaan

Microsoft Copilot: Your AI companion

Microsoft Copilot is your companion to inform, entertain and inspire. Get advice, feedback and straightforward answers. Try Copilot now.

copilot.microsoft.com

tet · 2 Marraskuu 2025

haraldh sanoi:
Miksi minulla on sellainen käsitys että EU-asetus astuu voimaan heti velvoittavana eikä vaadi kansallista lainsäädäntöä?

Kuukkelin tekoäly kertoili, että säädös on voimassa muuten täysimääräisenä kaikissa jäsenmaissa, mutta kansallisesti pitää päättää esim. valvontaviranomaisista, rangaistuksista määräysten rikkojille jne. Ymmärtäisin niin, että periaatteessa säädökset jo velvoittavat toimijoita. Mutta jos ne eivät niitä noudata, ei asialle voi mitään niin kauan, kun lainsäätäjät eivät ole määritelleet rangaistuksia tai ylipäätään sitä kuka hommaa valvoo. Onko nämä kaikki toimet jo Suomessa hoidettu, siitä minulla ei ole käsitystä.

-Teme- · 2 Marraskuu 2025

tet sanoi:
Kuukkelin tekoäly kertoili, että säädös on voimassa muuten täysimääräisenä kaikissa jäsenmaissa, mutta kansallisesti pitää päättää esim. valvontaviranomaisista, rangaistuksista määräysten rikkojille jne. Ymmärtäisin niin, että periaatteessa säädökset jo velvoittavat toimijoita. Mutta jos ne eivät niitä noudata, ei asialle voi mitään niin kauan, kun lainsäätäjät eivät ole määritelleet rangaistuksia tai ylipäätään sitä kuka hommaa valvoo. Onko nämä kaikki toimet jo Suomessa hoidettu, siitä minulla ei ole käsitystä.

EU tasolla on sanktiot olemassa. Niissä sovelletaan samoja sakkoja kuin GDPR rikkomuksista. Traficom on Suomessa valvova viranomainen.
Siksi tuo Traficomin antama vastaus, mikä jaettu Facebookissa hämmästyttää

-Teme- · 7 Marraskuu 2025

Tuo sähkömittarin datan excludauksen tulkinta, koska mittari ei ole kiinteistön omaisuutta on energiavirastosta käsin tullut.
Pääsin aiheesta haastattelemaan oikeustieteen proffaa, joka perehtynyt Datasäädökseen. Hänen tulkintansa oli että verkkoyhtiöiden tulee jakaa mittaridata, koska datan jakaminen ei ole sidoksissa omistamiseen vaan käyttöön. Perusteli leasing- ja vuokraus periaatteista, sekä siitä että kiinteistön ja verkkoyhtiön välillä on sopimussuhde mikä jo takaa saannin dataan.
Suomen valtio on myös jälkijunassa, kun aiheeseen liittyvä lainsäädäntö olisi pitänyt olla voimassa säädöksen voimaantullessa. Siihen tuo Traficomin vastaus onkin validi

-Teme- · 21 Marraskuu 2025

Kunnan vesihuoltoyhtiöltä tuli ilmoitus että vesimittari vaihtuu etäluettavaksi.
Kyselyä vesihuoltoyhtiölle, että perustuen datasäädökseen mistä ja miten saan itse haettua datan
Viikon ollut kysymys sisässä ilman vastausta

IoT laitteiden datan vapautuminen

Hyperaktiivi

Vakionaama

Jäsen

Vakionaama

Aktiivinen jäsen

Vakionaama

Aktiivinen jäsen

Vakionaama

Vakionaama

Vakionaama

Vakionaama

Hyperaktiivi

Data Points​

Data Points​

Device​

Electrical energy system (ESS)​

ems​

Floor heating (FHT)​

Fuel cell​

fuelcell​

Gateway​

hb2​

Heating​

Photovoltaic​

Point of common coupling (PCC)​

Rooms​

tcu​

Thermostatic radiator valve (TRV)​

vcs​

Ventilation​

water​

Hyperaktiivi

Vakionaama

Hyperaktiivi

Vakionaama

Vakionaama

Hyperaktiivi

Vakionaama

Hyperaktiivi

Jäsen

Vakionaama

Jäsen

Jäsen

Vakionaama

Data Actin käyttäjämääritelmä täyttyy​

Carunan vastine on ristiriidassa tosiasioiden kanssa:​

Jäsen

Moderaattori

Vakionaama

Hyperaktiivi

Vakionaama

Vakionaama

Aktiivinen jäsen

Vakionaama

Vakionaama

Vakionaama

Vakionaama

Hyperaktiivi

Vakionaama

Vakionaama

Vakionaama

Data Points

Data Points

Device

Electrical energy system (ESS)

ems

Floor heating (FHT)

Fuel cell

fuelcell

Gateway

hb2

Heating

Photovoltaic

Point of common coupling (PCC)

Rooms

tcu

Thermostatic radiator valve (TRV)

vcs

Ventilation

water

Data Actin käyttäjämääritelmä täyttyy

Carunan vastine on ristiriidassa tosiasioiden kanssa: